well I'll beable to see how good the tool life is as iv got about 120 parts todo. As for tool I'm using a MA ford 12mm varimill

Ran this today with chip thining, ran with feed of 2400 and spindle at 3200. Cut like a dream

Looking at the data base, my spindle speed seems a bit on the low side, I've just done a search but can't seem to find it, but any got the formal for chip thining I can use in excel?

Hi everyone, Haven't really done much dynamic milling, few jobs coming that it would be ideal on. I'm just after a starting point really for Speed and feeds. I'm usings a 12mm endmill doc 16mm. I have around 12000 rpm. Now I ran this last time with a feed of 2200 mm/min and spindle at 1900 rpm and 10% step over. now tbh these were a bit of a guess, and after seeing a few post regarding chip thining I want to get my head around it a bit more technically. P.s. sorry it's metric Regards.

this is also true, we have to give one of our other DMU's a "love tap" to get the screen to work when we switch it on.

can u post that bit of the program up?

we use a SNMG for roughing and button tool for finishing

Is it a dmu 50 evolution or the 3+2 version. We have 2 small dmu's and have had the bolts shear on the b axis clamps at least 4 times, one is currently down for this reason, and the machine is just over a year old. One thing to try that might keep you going is slow your feed down for the spatial/cycle 19 move. Do you get any errors at all? Or just the e stop?

just wondering if anyone has or knows of a post thats been done for a schutte 5 axis grinder using mastercam?

its a custom one we got off our dealer and its written by cimco.

the files on the FTP in mx5 files and its called rotary issue zip file. i did have another issue at first, where every time the machine would read C0 it would unwind rather than one contionus rotation, thats sorted and it was down to a machine parameter which wasnt reading M94.

Hi everyone, Im after some advice, I’m machining a part that looks a bit like a nasa shuttle using a rotary 4th axis toolpath. Now when i back pot in mastercam it all looks good, even in verify it all looks fine and i get the results i want. Now when i post and run on the machine it seems nothing like. The wings of the part rotate into the shank of the tool, so the wings and the tool are parellel to each other which is causing a problem. Now in mastercam the wings go nowhere near the tool when performing the rotary moves. The machine im using is a 5 axis DMG 50 Evolution I cant see anywhere were im going wrong. Could this be a post issue? Any advice would be much appreciated Regards

ye i left clicked on in the tool bar area and x+ was not present. As soon as he starts the install errors come up staright away. we have to be doing something wrong

Gunther, i have looked and X+ did not install. The I.T guy has the X+ setup.exe on the desktop and trying to run it from there. is this correct or does it need to be in the shared\mcam5 directory? regards

i downloaded the file in the first post, had another go and getting the same erorr. Any know what im doing wrong?