Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi
I have to make 60 degree dovetail in 4140 steel. I have 60 degree HSS dovetail cutter. What toolpath should I use ? depth of cut or approach distant. Should I rough dovetali with another cutter using flowlaine toolpath? I already mill slot.
Any help appreciated.
3-480-052-002.x_t
Hi,
I loaded today 2021 beta version of Mastercam in order to check ADVANCE DRYLLING CYCLE.
After installing it it is extremely slow i have to wait couple of minutes to do anything.
(Advance Drilling Cycle looking good it is what I need)
I have:
OS Name Microsoft Windows 10 Home
Version 10.0.17763 Build 17763
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name BASE
System Manufacturer Acer
System Model Aspire TC-885
System Type x64-based PC
System SKU 0000000000000000
Processor Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz, 2808 Mhz, 6 Core(s), 6 Logical Processor(s)
BIOS Version/Date Acer R01-A0, 29/03/2018
SMBIOS Version 3.1
Embedded Controller Version 170.170
BIOS Mode UEFI
BaseBoard Manufacturer Acer
BaseBoard Product Aspire TC-885
BaseBoard Version V:1.1
Platform Role Desktop
Secure Boot State On
PCR7 Configuration Elevation Required to View
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "10.0.17763.1007"
User Name BASE\wojte
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 10.3 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 10.3 GB
Page File Space 2.38 GB
How can improve performance?
Yes I did.
But there is the the only "Point cycle" and there is only point location and nothing about depth parameters and other parameters. Consequently when I posting it is not giving me all parameters which you give me as example. So if you kindly can show me how you did entire post I would appreciated.
Thank again
Thank you very much. That is what I need.
The only problem is how can I do it for all holes by programming it entirely in Mastercam and get the post for my Haas machine rather then copy and paste each hole using your test code.
Thank you very much I was able to open file and see exactly what you mean. I do not see however in backplot rapid movement. Maybe this will be in the post.
It is possible to program in Mastercam through holes in square tube 4X4 x0.375 . I would like to keep drill in the same hole drilling first wall then rapid down to bottom wall and drilling bottom wall, and then go to next hole.
I don't like drilling top surface and then come back and lower "top stock" and drill bottom wall. I would rather stay in the hole.
I can manually modify post ,but I have 30 holes and editing each one is very painful.
Thank you.
Hi,
I am trying to use FBD and have many problems with it.
For this example two 0.375 hole supposed be reaming holes, but Mastercam not drilling them for it, neither ream them. Insted using 0.375 end mill and I can't change it.
Please help me resolved this issue.
3-480-034-014NEW.mcam
Hi ,
I try to use FBD but instead speeding process it slow me down. It is giving different order of drilling and taping process. First drilling then , spot drilling then taping i have change order after. It is not picking right drill for tap hole. Plus showing so many FBM drilling cycles in tool path. See screen shot. Anybody can comments or help setting it correctly.
Thank you.
Hi,
I lost option to put line number in my post.
On tool setting page I have sequence number box "START" with 10 and next box " INCREMENT" box 10 as well but post not putting line numbers.
How can I get thous numbers back.
Thank you.
Hi,
I am working on the project below. I did programming ,but i am not happy with the finish on round edges.
How can I get better finish then this without putting much more time in operations. I am using "Surface flow line" with 3/8 ball nose cutter.
Any help appreciated.
3-400-004-006.mcam
Hi,
I am trying to machining attach part. I have problem with cleaning those steps in the grooves. How can I do it with minimal extra time for operation. What would be the best approach for deburing those bosses .
Any help and commends appreciated.
3-340-036-008-B.mcam
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.