Ok thanks guys, now I know.

Great thanks where is this list, I can't find it obviously. Does this list include ones that still reside in the latest release/MU but have been identified and are being fixed? This would be nice so one you come across a bug you don't have to waste your time and your local re-seller's time, in investigating, verifying, and submitting something that is already being addressed.

Is there a list of known bugs for Mastercam? We have been updating as the new releases come out, and invariably (as with all software ) there are bugs. I would love to know which of the bugs are being addressed before submitting requests to my local re-seller. I have of course searched, and cannot find a list. Thanks

Yes it is, and thanks for the suggestions.

Hmm Not exactly sure what you mean by this? Mastercam origin is the same as the work offset in my file if that is what you are referring too?

Hey guys trying to build a a machine for Simulation. I built the machine with the origin at the machine home, and am using the "Workpiece_Transform" in the Kinematic tree to put the work piece in the correct location on the machine. Problem is that on the first OP the piece is about 5 to 6 inches to low, but when it gets to the second Op it raises up to the correct location. Any thoughts on what I am doing wrong or is this just a glitch? FYI, I was able to replicate this issue using the same tool paths and one of the pre-built machines that come with Mastercam. Thanks Nick OP1 OP2 TREE

Is there a way to fill each bar in the code the code 39 produces? Only does outlines for me and the scanner won't pick up an outline of a bar. May be there is a font setting for code 39 that I am missing? The only way I have figured out how to print useable bar codes out of Mastercam is to into import a jpg of a bar code using the Chook Rast2vec then filling the bars with hashmarks. Ideally I would like to use the font Code 39 and use the Note featuer in mastercam to print out bar code. Thanks

No I haven't, and yes it worked awesome. Wish I would have known about that one years ago. Thanks!

Thank you very much for answering this, it was driving me crazy. We should have stuck with X6. I guess we will have to hand edit everyone of the 100s programs which use this toolpath untill it is fixed......arghhh

That didn't work, but it is good to know that it works for you.

Guys, Recently upgraded to X9 from X6. Reference points are no longer working when using the Multiaxis Toolpath - Drill. They do work for the Multiaxis Curve toolpath. Any suggestions? I have uninstalled/installed Mastercam. This is occuring on the two seats we have running X9. Thanks

Anyone notice that in X9 these don't work?

You have to pull it out of the toolbar menu to run it.