![](https://www.emastercam.com/uploads/set_resources_9/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Brian Scullion
-
Posts
83 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Brian Scullion
-
-
I know about that thanks Chris but I meant without having to modify the post Just something cheap and nasty
-
I know about that thanks Chris but I meant without having to modify the post Just something cheap and nasty
-
If you don't clear the result colour (purple)
then you can undo but after this tough.
-
We have 3 of these machines : No problem
-
4D ENGINEERING UK is your local dealer talk to Stuart Rooney
-
In this case I am using regular pocketing toolpaths, if I use co-ordinate then the tool plane does not rotate
and If I use toolplane while in verify it looks right the co-ordinates do not tie in
I have already given up on this and have just created extra toolplanes and geometry and reselected something like crazy millman suggested
-
I cannot do this for this machine or this job
it is a horizontal head-head machine
Basically what I done was rotate one component 180 deg's looking in the top view so as I could nest 2 parts in the one billet
I had thought about just rotating the geometry and reselecting but I was trying to perservere and get my head around the transform operation
My thinking was it would save me time which as usual I dont have
-
OK I'm trying to transform (Rotate) a 5 axis toolpath around an axis so I can machine 2 parts from the same billet.
The results I'm having are somewhat confusing can any one help explain this
So far I think you create a tool plane and create a toolpath then you go into the transform operation:
-click rotate
-select tool plane
-press rotate tab
-select about a point
-click on the point
-turn on select view
-click the top plane
-set rotation angle (180) and no of steps to (1)
press ok
The only thing is I'm having limited sucess with this
-
I would like to be able to post specific m codes directly into the nc code just in the way manual comments do but without the bracketing ie. for special jobs that require additional codes like hydraulic clamping etc.
-
To stop the waterfall effect
Open the verify parameter doc stored under C:mcam9millopsverify.prm
Roll down to line 76 and insert a new line number 77 0.0025
start with this value and increase by 0.0005
untill you get the result you need
I had this problem last week and whenever I rung technical support this is what they told me to do.
It worked
-
siemens or fanuc I think and you really want the fanuc option here.
-
You need to speek to Unisign they will send you the data It isnt really a demo cd but a video file of the machine in action on some aerospace components And this thing does shift metal!!
-
N : No
F : Fri**in
L : Life
-
Some of our tool suppliers have mentioned these machine tools and all have said that they are quite good.I myself have seen the demo cd video for these and am indeed quite impressed.
-
Thanks whenever / if ever I receive them I sure know where to come
-
We also save the cut model as an stl but rename it to op2 ,that way whenever we want to cut the 2nd op we change only the wcs and then recut the op2 stl file. Mastercam takes care of the translation by using the WCS
-
In the job set up page untick the display stock
box to get rid of the stock box
If mastercam is drawing lines which you have to delete to get rid of I can only assume that you are constantly creating a bounding box for your stock This is not nessecary unless you need that geometry
-
Try tool parameters cut depths in the operation manager for the toolpath you need to adjust
-
We have a new customer who is looking to supply
us models as anvil files and is unsure of what
his software can convert these too
So that we can look at them, any Idea's apart from say Iges
-
there must be no file extensions after the program name
-
Mathew
If you do not check the open pockets cutting method box. but still select the open pockets as your pocket type.
you then can use all the other pocketing cycles to machine a non closed chain.
Mainly I would use Zig-Zag .
This will allow you to rapid between cuts
-
Thanks
-
Did you set up your tool definitions correctly as
perhaps the rapid tool move's are hidden inside the stock
Just a thought
-
While configuring the mp masterpost for our new machine . I noticed the following string.
However when I Looked in this directory its not there.
Where do I get this at. ?
I'm hoping this will post both the code and the setup sheet at the same time ??
############################################
#Launch HTML.set during posting
sdll "C:Mcam9ChooksMP_Multi.dll" # Name of the .DLL to be called
spost1 "HTML.SET"
##############################################
Post Question
in Industrial Forum
Posted
All heidenhains can read ISO format but the last owners may have disabled the .ISO file format if so just switch it back on again
Paramater Mp7224.1 change to "0" (do not disable editor)