My dealer said he thought it would not be out till the first of the year.

Jody

Mine does that also. It did not do with X only X2

Gets to be annoying typing on something then boom theres mastercam.

Jody

Nice Job!

Thanks Thad and Colin.

Jody

Thank you Jack

That was easy. I should have seen that. It must have always defaulted to 10000 in other versions. cause I tant never touched it before.

thanks

Jody

When I verify I have true solids and turbo on then I will click on the fast forward button. In X2 the fast forward button doesnot always fast forward it will show the material disappering like the play button does. If I switch to the non turbo mode then fast forward works fine but is obviously alot slower.

I'm I the only one that has this problem?

thank you

Jody

Thank you aleast I am not the only one.

Jody

Am I the only one that sees this as bad? or is it not doing that for the rest of you?

Jody

That is what my dealer said.

8000 posts WOW John

Thank

In X Mr2 backup did not backup the autosave file ([email protected]) it would only backup the file that I am working on (job number123@100). Now in X2 It is still backing up the working file, but now also the autosave file and it does not limit the number of backups of the autosave to the 10 that is in the config. So I just deleted 71 files named [email protected] thru [email protected] in the directory that I am working on. Is that right? My dealer said that is what his does also. I like the X MR2 backup better.

Thank you

Jody

yes

and thanks

Mike

Could you put it up on FTP? Thank you

Gilberto,

My computer is very slow if I am generating a path then open another seat of Mastercam. When I turn on affinity from 0 to 4, 5, 6 and 7 on the mastercam that is generating a path the computer speeds up. I wish that I knew more about affinity and how to us it better.

thank you

Jody

Colin thank you

I have 8 processors it says because of hyperthreading. which numbers are the hyperthreading processors? and why are they not all on I think that would make every program running use all the processors avalible.

Where is the best drivers for the ATI firegl v3400 for Mastercam?

Thanks

Jody

how do you let windoze handle it or how do I know that it is handling it in a good way. if i have two MCX open it seems slower.

Thank you

jody

What is 'Set Affinity' I am now running a dell somethin with two dual processors and hyperthreading. and a an ATI firegl v3400.

Mastercam does not seem any faster than the old 3.0 single processor to me. when I run cimco HSM and turn all 8 affinity's on then the time of process is almost the same as elapsed time. If I leave the affinity on just 0 is it using all the processors?

Thanks

Jody

New Place of Employeement

Regal Mold.

X Mr2 and Cimco HSM

We know how Sticky you are Thad.

OIC that works just like you say it does. The only problem is that MC does not know the difference between what I want it to do and what I tell it to do. duh I clicked on all operation in the file that I was working on but I was cutting to different pieces of steel.

Thanks for the use of the crowbar to pull my head out of my butt.

Jody

I Just tried the way that you said John using a stock model on a different level. but using it with WCS the stock is cut only for the top view. so if you had a cut from the side or bottom it shows it cutting from the top.

Thnk you

Jody

I think that he spit on me when he flew over me on the way to detroit.

Jody

Thanks Steve check your email for my address to send the signed copy too. You did not have go to Detroit to get it for me though.

Jody

Has anyone read Hanser gardner 's hard milling & high speed maching: tools of change and is it worth getting?

thank you

Jody

look here Lucky has good sucess with Agie and Mastercam. We have two Agie wires and one plunge they are awesome.

Jody

Jerosu,

Your machine does not care if you have two 'M' codes in the same line? The Haas we have wont let me do that.

If you dont mind could you show me what your post looks like in that area maybe I can figur it out.

Thanks

Jody

It can not be as easy to do as changing this

 # Coolant M code selection

to this

 # Coolant M code selection

Is it?

Thank you

Jody

Mine of course.

I could not pronouns '3 prong plivoting blivit' good nough so I dont want to try ta but I tink you rite that is the name of the steel spindle set stopper.

Jim,

Back to the main subject. Just talked to the haas sales guy. He said that haas has a widgety thingy mabob that you can bolt on to the spindle to lock it from spinning.

Jody