Jody
-
Posts
452 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Jody
-
My dealer said he thought it would not be out till the first of the year. Jody
-
Mine does that also. It did not do with X only X2 Gets to be annoying typing on something then boom theres mastercam. Jody
-
Nice Job! Thanks Thad and Colin. Jody
-
Thank you Jack That was easy. I should have seen that. It must have always defaulted to 10000 in other versions. cause I tant never touched it before. thanks Jody
-
When I verify I have true solids and turbo on then I will click on the fast forward button. In X2 the fast forward button doesnot always fast forward it will show the material disappering like the play button does. If I switch to the non turbo mode then fast forward works fine but is obviously alot slower. I'm I the only one that has this problem? thank you Jody
-
Thank you aleast I am not the only one. Jody
-
Am I the only one that sees this as bad? or is it not doing that for the rest of you? Jody
-
That is what my dealer said. 8000 posts WOW John Thank
-
In X Mr2 backup did not backup the autosave file ([email protected]) it would only backup the file that I am working on (job number123@100). Now in X2 It is still backing up the working file, but now also the autosave file and it does not limit the number of backups of the autosave to the 10 that is in the config. So I just deleted 71 files named [email protected] thru [email protected] in the directory that I am working on. Is that right? My dealer said that is what his does also. I like the X MR2 backup better. Thank you Jody
-
yes and thanks
-
Mike Could you put it up on FTP? Thank you Gilberto, My computer is very slow if I am generating a path then open another seat of Mastercam. When I turn on affinity from 0 to 4, 5, 6 and 7 on the mastercam that is generating a path the computer speeds up. I wish that I knew more about affinity and how to us it better. thank you Jody
-
Colin thank you I have 8 processors it says because of hyperthreading. which numbers are the hyperthreading processors? and why are they not all on I think that would make every program running use all the processors avalible. Where is the best drivers for the ATI firegl v3400 for Mastercam? Thanks Jody
-
how do you let windoze handle it or how do I know that it is handling it in a good way. if i have two MCX open it seems slower. Thank you jody
-
What is 'Set Affinity' I am now running a dell somethin with two dual processors and hyperthreading. and a an ATI firegl v3400. Mastercam does not seem any faster than the old 3.0 single processor to me. when I run cimco HSM and turn all 8 affinity's on then the time of process is almost the same as elapsed time. If I leave the affinity on just 0 is it using all the processors? Thanks Jody New Place of Employeement Regal Mold. X Mr2 and Cimco HSM
-
quote: I have no problem with my settings sticking. Thad We know how Sticky you are Thad.
-
OIC that works just like you say it does. The only problem is that MC does not know the difference between what I want it to do and what I tell it to do. duh I clicked on all operation in the file that I was working on but I was cutting to different pieces of steel. Thanks for the use of the crowbar to pull my head out of my butt. Jody
-
I Just tried the way that you said John using a stock model on a different level. but using it with WCS the stock is cut only for the top view. so if you had a cut from the side or bottom it shows it cutting from the top. Thnk you Jody
-
I think that he spit on me when he flew over me on the way to detroit. Jody
-
Thanks Steve check your email for my address to send the signed copy too. You did not have go to Detroit to get it for me though. Jody
-
Has anyone read Hanser gardner 's hard milling & high speed maching: tools of change and is it worth getting? thank you Jody
-
look here Lucky has good sucess with Agie and Mastercam. We have two Agie wires and one plunge they are awesome. Jody
-
Jerosu, Your machine does not care if you have two 'M' codes in the same line? The Haas we have wont let me do that. If you dont mind could you show me what your post looks like in that area maybe I can figur it out. Thanks Jody
-
It can not be as easy to do as changing this code: # Coolant M code selection sm09 M9 #Coolant Off sm08 M8 #Coolant Flood sm08_1 M83 #Coolant Mist sm08_2 M88 #Coolant Tool scoolant #Target for string to this code: # Coolant M code selection sm09 M9 #Coolant Off sm08 M8 #Coolant Flood sm08_1 M83e$M8 #Coolant Mist sm08_2 M88 #Coolant Tool scoolant #Target for string Is it? Thank you Jody
-
Mine of course. I could not pronouns '3 prong plivoting blivit' good nough so I dont want to try ta but I tink you rite that is the name of the steel spindle set stopper.
-
Jim, Back to the main subject. Just talked to the haas sales guy. He said that haas has a widgety thingy mabob that you can bolt on to the spindle to lock it from spinning. Jody