Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I have some vertical lines that are being offset,
once there moved you can not see them but you can
analyze them and delete, checked levels, repaint
screen but the geometry is invisible.
any help would be appreciated
Charlie
Thanks Eric
What I am looking for is in the the create letter
box, there is a parameter box the shows letter height, it defaults to 1., I would like to change
the height default to .1
Charlie
WE have a computer with level one mastercam,
when in operations manager you go to the tool
library to bring in a new tool the spindle always
defaults to 10000rpm,when the tool is set to 5000
rpm. I t does that with every tool.They all default to 10000 rpm.
any help would be appreciated.
Charlie
When going to convert a file to a dxf ,on the bottom of the screen files of type. Always defaults to dwg files. Is there a way so it
will default to dxf?
Charlie
The select all was on and they all had same name
still would not work.
tried it smit's way and it worked.
thanks to all of you for your generous help
Charlie
When I have a program that I made fresh,I can go into operations manager and post all tool paths
nad it works fine.
But if I decide a week later to add another tool path to same program, when going to tool operations manager and select all to post.It only
posts the original program not the new one.
Any help would be appreciated.
Charlie
Hi,I am doing something wrong. When projecting
2d contour onto a surface the toolpath doesn't
match correctly on the surface.
It is on the ftp sight called project test1
Charlie
We have 3 mastercams on the shop floor, and we all
take drawings off the same server.Why is it when we all bring in the same print the colors of the
dimension vary from one computer to the next?
Charlie
I should explain this a little clearer.
We have two new seats of mastercam9 level 3 one with solids and the other seat no solids.
With a server to save our files on.
On the seat with no solids if you want yo bring
in a geo file, you click on all files and you can
get any ver ge3, this computer also has windows nt.
The seat with windows xp and solids will not
get a mc8 file if you clicked on all files like the other computer.But both computers are pulling
from the same file, I hope this explains it better
Charlie
WE have mastercam ver 9, and in the mc9 folder we
loaded in all mc8 files and all older ge3 files.
The problem is when go load in a mc8 file we
have the folder set for all files and it wont bring in the mc8, but if we switch from all files
to mc8 files it will bring it in.I was under the assumption when you had all files open that it would also take a mc8,mc7,mc9 or any ge3.what am I
missing.
Charlie
we just got mastercam version9 with solids a few weeks ago. The only mistake we made was not getting it much much sooner. With the help of the knowledgable people on the forum you can be up and running in solids in a relatively short period of time.
Kevin
On the problem computer I changed the secondary
color to blue, and drew a line. It looked green,
but I saved it and brought it up on other computer
the line was green on that computer also.
The problem computer had ver 8 on and everything
worked fine, now we installed ver 9 on the same
computer and are having problems.
When I click color in the secondary menu, it
doesn't matter what color I choose, it will only
draw in the color green.
And in the screen,config,system colors
it is set on color red for geometry.But still
draws in color green.
We have two mastercams ver9 level 3,
when you change the color on one of them
it works fine.It will draw in a different
color other than the default.
On the other computer it always draws in the default color even if you change color on menu.
thanks
Charlie
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.