Lowcountrycamo

Go to the plane manager, open up the settings, and deselect the "Display plane info relative to WCS" line.

Found a previous thread in regards to my problem and figured it out.

This is the most helpful site on the internet.

JB7280

I'm having the same issue as you in 2022.  Where did you uncheck the "display plane info relative to ECS" BUTTON?

thanks

Joey

Figured it out.  Thank you for the original post.

Forgot to mention that the file is a Mastercam 2019 file opened in Mastercam 2022

Hello all

My struggles with Mastercam 2022 continue.  Now the tool plane names in the toolpath manager all say "undefined*. 

I tried to regenerate all of them and I tried creating a copy of the tool plane and select that but it still comes up as undefined.

Anyone know how to correct this?

Think I'm good now.  I copied my kmp file and my mastercam workspace file from 2019 to 2022.

Thanks for all the input guys.  Much appreciated.

I agree with you Millman.

I got my first issue resolved but now my function keys are not working.  They are working fine in mastercam 2019 but not 2022.

any else come across this.

Thinking I should go back to using 2019.

JParis

Not sure if I can.  

Yes, One drive

Hello all.

Having an issue with the System configurations in Mastercam 2022.  Everything I change is not staying as I set it.  I will change something and click "apply" and then save it.

Then the next time I start a session of mastercam, none of my changes stayed.

Anyone have any suggestions?

Thanks

Joey

Just switched to Mastercam 2022 from 2019.  How do I permanently turn the glow display off?

I've turned it off in the system configure window and saved.  next time I open Mastercam 2022, it's turned back on.

thanks

Thanks Crazy

Yes, Seimens control.

Sorry, I failed to mention that.

Morning Everyone,

I have a question in regards to DMG machines and uploading programs.  We have almost two dozen Milltaps and DMP 70 machines with more on the way.  We have programs in the machines to capture part information, operator info, cycle times etc.  Once a month we go through and upload these files to our server. 

My question is, is there a way to upload these files on a certain date and time once a month automatically without any human interaction?

Any guidance or suggestions would be appreciated. 

Thanks ahead of time.

Joey

Where does everyone get their probe styli from?  Particularly Blum styli.

thanks for the advise.

Thanks Gcode

No, I'm the only one that uses it.  I was thinking it has something to do with our servers.

Afternoon all

Wondering how I can save my right mouse button menu? 

I keep losing it about once a month lately and it goes back to the default settings.

Suggestions?

Thanks

Joey

Thanks Rekd

Hello  all

I was wondering how difficult it is to build a machine for simulation?  I have all the models of the main components.  Is there a guide or a video available?

Currently using MasterCam 2019

Thanks in advance

Joey

Thank you for everyone's input and help.  greatly appreciated.

Sunny 

Could you please post an example?

Colin

I'm looking to insert the Toolpath group name.

I turned on my switches in the control definition.

Here's what I have for pbore2$:

pbore2$          #Canned Bore #2 Cycle     #DJ  CHANGED TO A G66 OUTPUT
    drilgcode = 2
      pdrlcommonb
      pcan1, pbld, n$, *sgdrill, dwell$, pdrillparam1, sopen_prn, scomm$, sclose_prn, e$
      pbld, n$, pfxout, pfyout, e$ #force out X and Y again for 1st cycle
      pcom_movea

Alex

Sorry it's been a few weeks since I was working on this.  Not quite following you here.  Can you post an example please?

I also tried doing what Gunther suggested and that's not working either.

What I'm looking to do is inserting the group name right after my sub callout

G66 P0681 F750. (THROUGH HOLES / BALL SURFACES SUB)        <-------------------------------------- Group name ------------------------

Gunther

Not quite following you here.  I don't see a "pscomm" in my post.  Is that a comment section I would have to create in my post?

Thanks

Joey