Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
JB7280
I'm having the same issue as you in 2022. Where did you uncheck the "display plane info relative to ECS" BUTTON?
thanks
Joey
Figured it out. Thank you for the original post.
Hello all
My struggles with Mastercam 2022 continue. Now the tool plane names in the toolpath manager all say "undefined*.
I tried to regenerate all of them and I tried creating a copy of the tool plane and select that but it still comes up as undefined.
Anyone know how to correct this?
I agree with you Millman.
I got my first issue resolved but now my function keys are not working. They are working fine in mastercam 2019 but not 2022.
any else come across this.
Thinking I should go back to using 2019.
Hello all.
Having an issue with the System configurations in Mastercam 2022. Everything I change is not staying as I set it. I will change something and click "apply" and then save it.
Then the next time I start a session of mastercam, none of my changes stayed.
Anyone have any suggestions?
Thanks
Joey
Just switched to Mastercam 2022 from 2019. How do I permanently turn the glow display off?
I've turned it off in the system configure window and saved. next time I open Mastercam 2022, it's turned back on.
thanks
Morning Everyone,
I have a question in regards to DMG machines and uploading programs. We have almost two dozen Milltaps and DMP 70 machines with more on the way. We have programs in the machines to capture part information, operator info, cycle times etc. Once a month we go through and upload these files to our server.
My question is, is there a way to upload these files on a certain date and time once a month automatically without any human interaction?
Any guidance or suggestions would be appreciated.
Thanks ahead of time.
Joey
Afternoon all
Wondering how I can save my right mouse button menu?
I keep losing it about once a month lately and it goes back to the default settings.
Suggestions?
Thanks
Joey
Hello all
I was wondering how difficult it is to build a machine for simulation? I have all the models of the main components. Is there a guide or a video available?
Currently using MasterCam 2019
Thanks in advance
Joey
Colin
I'm looking to insert the Toolpath group name.
I turned on my switches in the control definition.
Here's what I have for pbore2$:
pbore2$ #Canned Bore #2 Cycle #DJ CHANGED TO A G66 OUTPUT
drilgcode = 2
pdrlcommonb
pcan1, pbld, n$, *sgdrill, dwell$, pdrillparam1, sopen_prn, scomm$, sclose_prn, e$
pbld, n$, pfxout, pfyout, e$ #force out X and Y again for 1st cycle
pcom_movea
Alex
Sorry it's been a few weeks since I was working on this. Not quite following you here. Can you post an example please?
I also tried doing what Gunther suggested and that's not working either.
What I'm looking to do is inserting the group name right after my sub callout
G66 P0681 F750. (THROUGH HOLES / BALL SURFACES SUB) <-------------------------------------- Group name ------------------------
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.