I get that all the time its just a glitch in the translation of the imported file. I usally rewrite the solid/surface and start over

I'm not at all experienced with posts. how would I be able to tell if the hurco post is based on the mpmaster post?

wound that work in the hurco post?

The shop foreman asked if I could add the max. cutting depth for tool paths. I couldn't find a way to include these in the setup sheets, so other then manually checking the depths and writing them down I can't any alternatives. Does anyone have any suggestions? Thanks in advance

You should be able to select an earlier version of the parasolid converter in solidworks

Good Morning Folks I have a question regarding reverse posting I have a program that went heywire on 2 cutter paths the verification looks fine so I need to reverse the post to find out if the problem is in the nc file. My question is how do I edit the post menu to add reverse to run the rp chook the directions in the c-hook are confusing thanks in advance for all your help

there's a program called laplink thet will allow you to connect the two computers. I've used in in the past and it worked pretty well but it ain't cheep

Wally good luck I gave it up 15 years ago and never looked back. ( I never forgot either ) All these guys have excellent Ideas. mine was restoring old cars. But you have to do what work for you. If you survived Viet Nam you can survive this. best of luck. life is great as long as you can live it sober !!!

I HAVE SEEN THE LIGHT !!!! (and they said I was a dim bulb)

I use gcd when posting to our mx3 trak thru the network

solidworks is easy to learn, easy to use and imports complete solids directly into mastercam

good morning gentlemen I tried to install the hasp update last night but It wouldn't cooperate it won't accept the "i" perameter. I couldn't find any error file in mcam9 or c drive. I think it's time to get the "IT" guys involved.

no I don't

iskander: I tried all types of different settings on my grafix card. I don't know what drivers are installed for my mother board or grafix. I had xp home on the computer originally but changed it to 2000 pro because of problems with advertisements loaded on the computer when I bought it. I reciently insalled xp pro after I caught a virus I havent upgraded any drivers only windows patches and upgrades (I am not a computer wiz as you can probibly tell)

Iskander: do I run the hasp update install i