Lathe-Mill, In the FTP site in the "Just4Fun" folder - I have put a drawing called "Flags". These are left&right waving flags that I drew for a Laser program. You may have to scale them to your needs. Hope this helps.

--------------------------------------------------The last time that happened to me, the vise wasn't tight on the table -------------------------------------------------- Typical from a Marine to a Sailor. LMAO

I see him becoming a farmer with (2) Acre`s

I know we aren`t. They were in last week to fix the Laser and an over-all. They changed 2 lenses and screwed around -w- the boards. Still doesn`t run any better. The ball screws are wearing and they never even looked at them. I think we are gonna go -w- Trumph real soon.

Here the print rules - the quote is made from the print. The cad file is requested after the quote is accepted. If there is a discrepancy we call to sort out. I send our inspection lab an IGES file for the CMM. Example - last week, the print and cad file had 2 different wall thicknesses. The print was correct. So inspection had to compinsate for the variance.

if you don`t have a ".dwg" convertor in an older version of MC - then go with the .iges. In AutoCAD you simply type in at the command line. "igesout" to save and "igesin" to import. Before importing or exporting - at the command line, type "CMDDIA" and hit enter. Make sure you are set on #1. Also. type in "FILEDIA" and hit enter. Make sure you are set on #1. These settings will bring up your display optoins when you iges in or out.

what about saving in AutoCAD as "IGES"? , type "IGES OUT" at the command line - you should be able to pull it into MC that way.

here we run Striker for the Trumph punches. Striker is an add-on for AutoCad. It also has unfolding capabilities and sheet griding.

SLJ - M14 here, 7.62x 54mm. 1,000 yard targets -w- starlight scope. I`ll think of you in the morning when I`m out there. Good luck.

Ya - a couple months ago. Bought a new Robo Drill there. A sweet machine.

Down town - Exchange Street. A block from the War Memorial.

Lars - your e-mail is not aviaible, just curious what part of upstate you are from?

Is he still alive?

Jack, hope things work out for your wife. When you do, however, get a chance to get away - have you ever concidered driving to Toronto and taking the "Fast Fairy" into Rochester? If you ever do - drop me a line & I`ll be glad to point you in some intersting directions. Once again - good luck to you and the misses.

I`d like to see Poker as a choice. Is that considered a sport?