just select all operation and right clic and chose EDIT COMMON PARAMETER and change what you want

it is possible to open the window only when he have note inside when mastercam is close

It is possible to create one for point in middle of line the line doesn't create only the point

it's is possible to create another chook for mcamx2-mr1 because in the ftp does not work

try AI SOLUTON AI_Utility_X2_1_08_en.exe

excuse my english I speak french ok on the screen in mastercam the shape is good but in the control the is top is bottom and bottom is top my bottom shape is Z0. and top Z2. my thread point is Z0.

I have 1 agie classic 2 2 agie classic 3 1 agie evolution and I can't post with mcamx2 I use mcam9 but I work with my dealer for use mcamx2 it's hard

French: est-ce que quelqu'un aurais un fichier excel qui calcul le centre d'un arc avec 3 dimension d'un arc merci English: somebody would have an Excel file which calculation the center of an arc with 3 dimension of an arc thank's

juste a écrire en francais et nous allons t'aider je suis francais de Montreal Quebec pose tes questions en francais et les autres usager du forum vont traduire eux même t'inquiète pas je ne vais pas souvent sur le forum mais si tu as des questions n'hésite pas a communiquer avec moi par email salut a+

Cadcam I do not understand too well English and I cannot correctly translate it

all right thank's

Dell M90 or XPSM1710 thank you in advance with the expert

all right but my probleme I am not able to make a vbs file or associate a macro excuse my english

excuse me I update my profile

THAD It is possible to associate with one clic on toolbar thank's

because I want only one clic i use this about 100 time per day

I need a small VBS for delete all 3dstar point any assistance is appreciated I y not very good in vb thank you in advance

I reboot my pc and noe I am ok

I have only the text on screen and line and radius no note i put before

when I create note I lost my drawing mcamx-mr2

GUHRING LIST 605 in stainless 420 I use only drill 1/4" whit no a reamer

I Need this part in dwg if it possible for any people thank's ftp://www.ppcadcam.com/Mastercam_forum/Dr...2-VAC-APROB.prt

mon alarme sur la machine ce situe au n7 CNC 0002 VALEUR ANADAPTÉE N7 N1 G0 G40 G44 G70 G80 G90 N2 T2 M06 ; 11/32 DRILL N3 G0 G90 X.5 Y-1.5116 S334 M03 N4 G43 N5 Z2. M08 N6 G83 G99 Z.1 I-.3153 J11 F1.3 N7 Y-2.763 I-2.5436 N8 X1.5 Y-2.0161 I-2.3236 N9 Y-3.3494 I-1.147 N10 Y-4.5127 I-2.4539 N20 G80 N21 Z.1 N22 G0 N23 M05 N24 M09 N25 G0 Z2. N26 M06 N27 G90 N28 M30

J = Peck I = Z bizarre premiere fois que je voie sa

je cherche une example de fichier .PIT j'ai un probleme si je fait un cycle de percage avec différent Z a chaque trous. j'ai programmé en incremantal donc les trop sur MCAM sont a differente hauteur en Z. mon output est N1 G0 G40 G44 G70 G80 G90 N2 T2 M06 ; 11/32 DRILL N3 G0 G90 X.5 Y-1.5116 S334 M03 N4 G43 N5 Z2. M08 N6 G83 G99 Z.1 I-.3153 J11 F1.3 N7 Y-2.763 I-2.5436 N8 X1.5 Y-2.0161 I-2.3236 N9 Y-3.3494 I-1.147 N10 Y-4.5127 I-2.4539 N20 G80 N21 Z.1 N22 G0 N23 M05 N24 M09 N25 G0 Z2. N26 M06 N27 G90 N28 M30 N'importe qui qui a une idée serais appréciée merci d'avance