mig
-
Posts
852 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by mig
-
-
Ok Steve,
thank you for the tip
-
Thank you guys .
-
Hi everybody,
This problem was in mr1, now I found same thing in mr2:
If I mistakenly rotated solid (for example), I can't bring it back!!!!?
This bug, I guess which should be fixed long time ago.
Frustrating
-
ok John,
Thank you for the answer
have you good weekend
regards
-
Sorry,
What is it "SetupX+_MR2 "?
-
Hi !
Is it possible to change precision in X/Y/Z ranges?
-
-
I never use filter from time I got gouge and found that bug was in ver 9.
Is it was fixed ?
-
Looks like i solved problem.
Setting - Config - start/exit- constraction plane must be 3d.
thank you everybody for replay.
Going for the next steps
-
Nothing helps so far.
B/box coming flat.
Shape- rectangular.
Tabs XYZ gray, so i can't use it.
I 3 times tried to switch on X and each time dropped because some weird stuff.
-
Hi!
Trying to create rect. boundery box in X mr2,
It doesn't work for me for some reason.
I do : create- b/box.- all entet.-stock
Kind of frastrating
Thank you in advance
-
I am using vericut 5.2.
Is it possible to run 5.2 under mcx interface?
Regards
-
Looks like west world become crazy.
Fight against own farmers, against own industry and illegal immigrants legally striking on streets for the rights.
-
I agree with John Paris
Manufacturing in NA is dying .
-
Hi Cadcam!
Thank you for the answer and I am sorry I probably heart your feelings.
I know my English is not perfect and I have spelling problems. Unfortunately when I came to Canada with 2 children I did not have the time for languish lessons. Basically I didn’t speak English at all this time and one of the kids was 2 years old only.
So I had 2 choices go on the welfare or to work as it is. So I choose second.
Now both of my kids (that most impotent for me) speaking and writing perfectly. One is in university graduated second in grade 8. And I am what it is. And BTW I can fluently speak and write on two foreign languishes.
Best regards
-
Hey guys.
I nicly surprise for such of quick responce.
I did resurch . I know that Radeon is not best for the mc but it works fine on my dell loptop with min slowing down hard. acceleration so far.
So i try ,sorry, to be chip, just bougt my own house and tight with cash now.
Best regards to everybody
-
Hi !
I look forward to buy new dell
It comes with 256MB PCI Express™ x16 (DVI/VGA/TV-out) ATI Radeon™ X600 HyperMemory [included in Price] vidio card.
If anyone have an expir. with this piece of hardwere?
Thank you in advance.
-
Hi .
Just interesting what technique you guys using to find smallest rads to use proper tool or for remashining when you cut complicate parting line or so ?
Best regards
-
Hey guys !
Thank you for response.
----------------------------------------
Can i ask why you want to run the machine without a tool in it?.
----------------------------------------------
Because if the is no tool in the pot you ask, it stops to do tool change right on the meddle of cycle and no alarm.
beej , where lockated this sensor?
-
I run this mashine for 2 years , it was working till now.
-
Yeas DavidB you are right
-
Enybody has this problem with vmc okuma mc4020 with through coolant system:
Spindel is not rotate when empty.
regards
-
-----------------------------------------------
You must see scallops on the wall. It better for insert to feat in.
------------------------------------------------
Ok, trying to explain.
For finishing pockets We using GARR TiAL coded cutters now (We don't have any another).
Finishing cutter must be run out NO more then .0005" . Also i am clearing corners of pocket with .002-.003" before finishing.
Rough pocket by insert cutter with .005".
Then by finisher i am making semi finish cut, leaving stock .0015-.002"(don’t forget dia of cutter usually smaller aprox. .001 then nom. size).Then check actual size of pocket , making some corrections if need and finishing pocket.
RPM i am using 700 , feed 13. (Take chips out from the cutter )
Wall of the pocket looks nice but not as a mirror. You can see like a scallops about .0002" on the wall.
Best regards
-
merry christmas!
simple question
in Industrial Forum
Posted
If some one has experience with next:
x-form - offset contour – then I am chaining- no dialog box ,it automatically minimized ? Should I change setting somewhere:
regards