Gary
-
Posts
567 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Gary
-
-
duplicate
-
Manual? Get a good condition Heald
-
Gotta buy it first then they tell ya.
-
only by color masking and hiding and unhiding an far as I know.
-
iscar has a good stainless grade 908 or 907 I believe. 350sfm and light .005 feed works pretty good. I think you could bump the doc cut up some to make up some time. .03-.035 doc.
-
I see the same thing?
-
Plus 1 to what Ron said. Even the best guys miss stuff once in a while. If they get charged or threatened to be charged I can guarantee resume updating will be in short order. If they screw up all the time then just cut your losses and let em go.
-
Ours are all turned on I will have to look into that.
thanks
Gary
-
I use a touch pad in the corner of the table which is set to g59 it don't have a z offset in it. That way I can touch all tools in relation to my probing tool without having to worry about what is currently in the g54. Also it is nice to be able to hit g56 ect and see the actual position I am in for that offset, not instantly defaulting to the g54. I agree the setting 51 for the door is what must have happened.
-
Found it. setting 56. M30 restore default G
thanks
everyone
-
thats what I am looking for the parameter or setting. If I mdi 59 on the others it stays active.
-
Is there a setting on the haas that only will allow g54 to remain active? All of a sudden if I mdi in 56,59 ect the offset numbers will flash but default back to g54 on the offset page. This is making touching tools a pain. No one changed anything it just all of a sudden is that way this morning.
Any ideas what setting got changed?
-
I just hit the green button and run. So far so good
-
Gunguy, you are right in the feed/rpm I have to run our haas at on 4141ph. I have seen bigger machines blow it away but that's wear the haas likes to run. You should be able to walk away from the machine and have about 3hrs insert life with what your doing. I like the unattended running at not killing the machine myself. In soft stock you should be able to run in the 150.180 feed range, but I use highspeed paths so the step over is smoother.
-
I prefer a cute chic.
sorry been real long day
-
I would run .0002 scallop height to start/.
-
How deep you going? Soft or hard brass 360 soft or ampco hard. I would just cut around with contour. I don't think the hsm toolpath will be needed if soft brass it cuts real nice.
-
i use .gcd for large 3-d files its for reading gcode
I use .cam for anything I want to see in the machines graphics or be able to edit at the machine.
-
Could sleeves be inserted for the holes? Otherwise it will suck. Maybe a dampened bar?
-
iscar cnmg 432 about 65.00 box of 10 here for stainless anyways. Not bad I don't think.
Sorry if price mention is wrong. WE are small shop though
-
I grind flats if set screwed in. If the shank is to spin on the screw and gull they are a pain to get out and not wreck the holder
-
In small shops like mine I think management knows they have no idea what your doing or how to do it with the software. I think they kinda play down what your doing so they don't come off as hosed if you are not there. I think they are afraid you will want more money or something if you think you have them by the nuggets. Thats why they bust balls when your on vacation to get stuff done. I like it though it keeps it entertaining. I have always done post mods to get what you want and always get that, why are we wasting time on that look. That look is what tees me off.
-
I agree my shop thinks mastercam just programs the job like a microwave making popcorn. I just wish they had a clue sometimes on whats involved to draw program and post out a good accurate and mostly a effiant program. I am not saying its rocket sience but it ain't the same as running an engine lathe bridgeport either. I love getting time to make some manual parts sometimes, to me its more relaxing. I can't make as much as my ups driving buddy and I am one of the higher pays in our town, from what I've heard. Thats my ramble on why programmers are to come by.
Happy New Year
- 1
-
.cam for conversational
.gcd for gcode
Ours is windows 95 based and works fine.
sm control I think
Not so much for 3-d though no xyz output on same line.
x4 and x5 test what version fast
in Industrial Forum
Posted
yesum good idea