MATT MORGERA
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by MATT MORGERA
-
if this is not in the correct forum please move to the correct. has anyone had an issue when posting a program through cimco it adding additional characters or moves that should not be there. ex: G01 WOULD POST OUT AS GG01 M01 WOULD BE MM01 Z-3.555 WOULD BE ZZ3.555 OR X10.4442 WOULD POST OUT AS X111111111
-
Mastercam 2019 Tool Libraries for C &Y Axis Lathes
MATT MORGERA replied to Steven Manthey's topic in Educational Forum
in mcam lathe just merge them together and then all of your milling tool including drills ( not lathe drills but mill drills) will all appear under your milling toolpaths tab. -
have you tried to contact the hotline? if not try that they usually respond pretty quick once there is an open case file number is 1-855-dmg-mori if you need it
-
I have had the same issue using a wireless Microsoft mouse keyboard combo, it turned out that the Microsoft mouse was the issue, I switched over to a logitec mouse and no problems, now I'm contemplating getting a gaming mouse for the added convenience of the extra buttons
