Matt,

Even with a USB hasp, it will only work off of one hasp at a time.

Ok, now that we ruled out the z height. Even though you swicthed out your flush cups, is the wire hitting them at all?

I would agree with Kannon, double check the height of your guide numbers that you have entered in your machine. My guess is that is where the problem is.

gibbs,

Is there another printer aroundthat you could try it on, just to see if it is the printer or something else. Pain mentioned something that we have ran intop before and that is a memory on the printer might not be enough. If I tried another printer it worked just fine.

Dan,

While you are at it , make the DVD a burner. The mouse I would make a laser mouse wireless

I was going to say the same thing Keith, that is a lot of traveling for the mouse

Yeah,John what's with the counting days, birthday, anniversary, vacation, release of X2?

Kevin,

What kind of tools are you using for this kind of work? I know Iscar and others make tools for this, is the type you are using?

Disadvantage #3 You won't know what most of us are talking about.

Better stay put where you are at.

Shawn, you beat me to it

LOL John,

I think I have V5.5 in a box somewhere, maybe I will go back to that.

Also I don't see the need to pay the high prices of gas, so maybe I will have to go back to the horse and buggy.

Seriously,

MR2 has solved a lot of issues that were in the previous releases of X.

Shakey,

2 GB here also, with crashes almost never. As Steve said, memory is cheap, I would max it out or go to at least 2 GB.

My guess is like Hardmill said Video Card.

Shows all the solids here.

Roger,

That did acomplish what I was after.

Thanks

Thad,

I wanted to break the spline at one of the control points, which by creating points nodes as Roger suggested, I was then able to break the spline to the points.

Thanks again for the help guys

Thanks Thad,

I guess I was figuring that seeing how MC was recognizing the control points that it might be able to break at them or even trim to them. I ended up doing what you had suggested and broke them at the nearest.

Thanks for the help

bump

Can I break a spline at any of the control points or create a spline from control point to control point?

Was working, now not

Check to see if all the groups have the same name?

John,

Even though ashan's question might be answered, why can't there be an icon in the Create Circle Tangent group that does a full circle, when you choose two entities it is asking for a radius, so why can't the same be true for a full radius. To me this is more logical than creating a fillet with a full circle.

Just my .02

Ashan,

Create Circle Edge Points, press the icon with the two pioints on it, then the tangent icon, pick your circles. I don't know why this is not in the group Create Cirle Tanget (which would be the logical thinking)

slavetothemetal,

I put a file in your folder ASX445L1024M-1.zip.

Is this what you are after?

slavetothemetal,

Both the zip. and .MCX files have 0 bytes on the ftp site.

I'm with Chris, Cimco's DNCMax works very well.

MECHMAN01

In ver.9 Screen, Configure, NC Settings Tab, Post Settings, check the box next to Edit.

HTH