b_daddy
-
Posts
192 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by b_daddy
-
quote: its a nice feature to have is it on any wish list at all? I certainly hope so. That way you can go from one project to another without closing Mastercam all the time. It works in a lot of other software already
-
gcode, So it only supposed to work when you drag the file onto your desktop Mastercam icon? Not just dragging the file into the display area of Mastercam once it is already open?
-
Bump
-
Ok, any idea why it doesn't work here?
-
Has anyone figured out whay this does not work on some computers? Wish it did work, especially with dual monitors
-
This is what I am getting Cannot Create Arc Tangent 3 Lines
-
Has any one noticed an issue with creating an arc tanget to 3 lines? If I draw 3 lines and then go directly to Create Arc Tanget, pick either one of the icons for creating an arc tanget to three lines it works fine, on the other hand if i try and create and arc to lines that are already in the screen,it will not create an arc. The lines are on the same plane and they are lines and not splines.
-
Faster Than What?
-
Everyone have a save and Merry Christmas. And may year 2007 bring you joy and happiness!!! Thank you guys for all the help, laughter, and comments. See ya next year, I'm outta here.
-
Mastercam CAD usage Survey
b_daddy replied to Ken Erman from CNC Software Inc.'s topic in Industrial Forum
-
Adam, We use Cimco DNC-Max and it out performs anything that we have used before. Reliable and the service after the sale (which is very important when you have an problem) is unbeatable. I would higly recommend Cimco.
-
Mastercam CAD usage Survey
b_daddy replied to Ken Erman from CNC Software Inc.'s topic in Industrial Forum
quote: Looks like a drinking party in here.... LOL!!! Mark I was thinking the same thing. -
Sorry too slow( I must be still full from yesterday.
-
Does not seem to be working today either(must be still full from yesterday). quote: What is this patch for?? This is from the website. This patch is issued to address an Update Manager error:
-
Jeff, The book says 30-60fpm. Good luck on tapping that deep with a #4 tap. HTH
-
Thanks Shawn, I will add it a little later to my post and let you know how it went.
-
I know Thad, just thought maybe by some chance we could get our stuff before most people. Fat chance of that happening I guess. I guess the Kali. guys are closer than we are to the East Coast.
-
Shawn, Can you e-mail me that info also, I also was wondering how to do that? Thanks
-
Any Michiganders got theirs yet?
-
I have seen this in other softwares but not in MC.
-
Jeff, Can you make that thing a little smaller, it is way to hard on the eyes. As for your lead in/out, works here.
-
Heavy, You might want to try and uset he mpmaster post from the top of the page. It will work for that control also.
-
Double Side-Tap to hold down Plate
b_daddy replied to Bill Sutton@Accurate Machine's topic in Industrial Forum
We somtimes use carpet tape, it's a little thicker and holds more than regular tape. we get ours just at a hardware store, just any old brand. -
If I'm not mistaken, I don't think you need another Sim code, because in rality you are runniong your computer at work. I remote all the time from home, but we do not have a nethasp. The other thing to consider is the speed of you internet connection and the speed of your computer at home. There is some serious lag time, if you are doing anything wuth surfaces and solids.
-
Bob, We have Command holders here and they are all balanced to 20,000 RPM (very nice product). They say any thing over 5,000 should be balanced, but that is a salesman talking. I personally don't like the ER collets that much for any thing other than drills, thay don't seem to hold as good as a TG collet. HTH