-
Posts
510 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by shazam/TPP
-
-
any word if x+ has been updated to x2mr2 yet?
-
on your tool bar you have the choice of "all" or "only" select only and that will open up a sub menu to choose from.
-
Where is x+? on the FTP site?
-
also what chuck said.
-
Chris,
you need to edit the mpmaster post.
arcoutput$ : 0 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180
change it to 1.
-
we have fadals here and in the setp parameters you have a choice of m96/m97 default which rounds the corners. i don't know if haas has this but switching between one or the other may solve this. Another problem maybe a corner radius maybe smaller then your tool radius and your control is confused. either remove the corner in mastercam or try a smaller tool.
you can see if this is your problem by entering a smaller tool dia in your offset page and then graph it out (at the machine tool).
-
Justin,
get rid of the original x2 and use ver 9 only if you have to. force yourself to learn the x2mr2 it is by far better, but since you're used to ver 9 it may seem difficult. You should take the training on x2mr2 just so you're familier with the machine def/ control def. good luck
-
Welcome back (theme from Kotter) Mr. Moffaaaat.
-
i know it's a parameter in the machine. we have an 18i control had the same problem but the tech changed it when the machine was installed and didn't tell me which parameter. look in your manual or call fanuc. sorry couldn't be of more help
-
thanks MLS but we don't have the solids option.
-
i save my mcx file as a stl file to use as my stock in the verify mode, but when i call out the stl file i receive a "LW has found the STL file not tob closed and water tight. An approximation will be used as stock." when i draw the surfaces they're trimmed to one another and so on but i still receive this. Any help on this would be great.
-
try this for your toolbars it worked for me
http://www.emastercam.com/ubb/ultimatebb.p...ic;f=1;t=027576
-
boy am i a dumb a$$ or what? don't answer that. talk about a huge brain fart thanks Ron.
-
which post processor i use. i modified the mpmaster post and it's been working fine in x2mr1
but since this update it'll just post out Ooooo.
i ran the chook update and it made no difference.
here is my post code:
"%", e$
spaces$=0
n$, *progno$, " (", sprogname$, ")", e$ #added n$,
n$, " (MFG DWG-", sprogname$,")", e$ #NEW LINE
n$, " (X ZERO IS )", e$ #NEW LINE
n$, " (Y ZERO IS )", e$ #NEW LINE
n$, " (Z ZERO IS )", e$ #NEW LINE
spathnc$ = ucase(spathnc$)
smcname$ = ucase(smcname$)
comment$ # File descriptor
spaces$=0post code
-
just caught up on this, glad to hear you're doing well. amazing how your life can change in a split second. everytime i think of getting a bike i always seem to hear or witness an accident similar to this. goodluck and my prayers are with you AND your family!
-
M60 is brake on for A axis
M61 is brake off for A axis
M62 is brake on for B axis
M63 is brake off for B axis
-
Thanks for all the help guys. they all worked good!
-
-
I have one drive surf and two check surfs and am using advaced multiaxis. from there i select 5 axis multi surf and use parallel cuts.
-
did that and that's the filtered code that i pasted. I also will have small z moves throughout
the program. what a pain to edit all of this out
of the program.
-
When ever I post a milled multi-surf surface my axis will have multi stepped moves instead of one complete move. Does mastercamm break the move up or is it a post issue? I've tried different posts and it made no difference.
i'll paste part of the program. thanks to all in advance.
N872 A-3.183
N873 Z-.0001 A-1.125
N874 X.003 A-.307 F699.17
N875 Z.0001 A1.291 F1348.02
N876 A3.254
N877 A3.246
N878 A3.18
N879 A3.415
N880 X.003 A-.209 F512.96
N881 A-3.266 F1348.14
N882 A-3.12
N883 A-3.315
N884 A-3.323
N885 Z-.0001 A-1.461
N886 X.003 A-.289 F668.45
N887 Z.0001 A1.612 F1348.06
N888 A3.392
N889 A3.384
N890 A3.064
N891 A3.133
N892 X.003 A-.183 F458.22
N893 A-3.006 F1348.14
N894 A-3.008
N895 A-3.453
N896 A-3.462
N897 Z-.0002 A-1.753
N898 X.003 A-.252 F599.67
N899 Z.0002 A1.873 F1347.92
N900 A3.528
N901 A3.519
N902 A4.424
N903 Z-.0002 A1.404
N904 X.003 A-.177 F444.18
N905 Z.0002 A-1.309 F1347.69
N906 A-4.342
N907 A-3.583
N908 A-3.592
N909 Z-.0002 A-1.998
N910 X.003 A-.272 F637.29
N911 Z.0002 A2.142 F1347.97
N912 A3.656
N913 A3.647
N914 A4.259
N915 Z-.0002 A1.219
N916 X.003 A-.164 F414.02
N917 Z.0002 A-1.133 F1347.54
N918 A-4.181
N919 A-3.709
N920 A-3.718
N921 Z-.0002 A-2.285
N922 X.003 A-.257 F608.7
N923 Z.0002 A2.421 F1348.01
N924 A3.778
N925 A3.77
N926 A4.105
-
Thanks John! you da man!!
-
John Paris, dumb question here, how did you get that screen shot of your machine definitions page? I've tried a print screen and other things just to have a hard copy of mine. thanks!
-
Thanks crazymillman i read the other post and i had to edit my post to allow the G93 works great
now. editing thru mastercam didn't actually change it to inverse. problem solved thank you Crazy^Millman and to this great forum site. Excellent members and staff!!!!
adv 5ax help please...
in Industrial Forum
Posted
i don't see it there?