Search the Community
Showing results for tags '31i b5'.
-
Hi Guys Anyone in here with programming experience on Fanuc Robodrill with 4th axis? It's an 31i B5 control. I'm new to programming on Fanuc and i'm trying to get the MasterCam Post Processor working. I've made a simple program with tilted "B" axis in 57degrees. (I know i should be "A" but apperently thats the way Fanuc makes it!) If I delete G53.1 it works, but isn't it necessary? Also if you see any other problems in my program please let me know Regards Jacob test.txt
-
Hi guys I'm new to the fanuc controller, but have 15-20 years of experience with Siemens and Heidenhain. My workplace bought a brand new Robodrill with 21 tool holders. On both Heidenhain and Siemens you can have e.g. T50 in holder nr.1. and you just call T50, but on the Fanuc I can only have T1 in holder nr.1 etc. Is there any way to get about this, because we have a rather comprehensive tool library already setup in MasterCam and we are used to identify our tools by their respective number? On Heidenhain/Siemens you save the length etc. with the tool number. On Fanuc you save it under a H-number. Do you save the tools used, along with a tool offset list with every program, like a project? If so, how is this done? Regards Jacob
- 12 replies
-
- tool numbers
- tool library
-
(and 1 more)
Tagged with:
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.