Search the Community
Showing results for tags 'deburr toolpaths'.
My Multi Axis Deburr keeps making unexpected moves. At first it was really nice going around all the outside profile features then when it tried to deburr the hole(unnecessary since it's already spotted) and during the hole deburr it started to walk into the part. I tried excluding the edges of the hole but it just moved the gouge to another part of the program. Also I am getting that "vertical tool detected" error and I am not sure what to do with it when it prompts me so I hit enter and leave it at 0.0° which might be part of the problem. please help, I can provide a zip2go if you let me know where you would like it sent as it is too big to post here.
Seeing as how I love a good round of "look what I can do" and do not have access to many other programmers at my company. I figured this would be the best place for such a thing. I know this is probably child's play to most but I'm interested in discovering as many options (Rube Goldberg approaches are welcome) to accomplishing this task. I'm currently programming for the lathe department so the available machines are Haas ST-20y and DS-30Y. I know, I know, here comes the lathe guy (for now).. I used 3D contour and did a little trial+error with the "stock to leave" until it was just right. I'm using a 3/16 lollipop mill for this part and doing the top and bottom of a cross hole. If you have any tips or more efficient options for doing an operation like this I would love to learn more.. you know what they say, Knowledge is power 3D DEBURR.mcam