Search the Community
Showing results for tags 'webinar'.
Found 3 results
-
Join us for a free Webinar on December 12 How do you control multiple turrets and spindles in Mastercam? Join us for another Eapprentice Webinar on using Lathe Machine Definitions in Mastercam. How do we control multiple turrets and multiple spindles in Mastercam? The answer is that we use the Lathe Machine Definition file to create Axis Combinations. These Axis Combinations are then used to drive the toolpaths in Mastercam, while passing parameters to the post processor. We will also take a look at how the post processor can be setup to control many important aspects of turret and spindle output for 4 Axis Lathe Processing. Title: Using Lathe Machine Definitions Date: Friday, December 12, 2014 Time: 12:00 PM - 1:00 PM PST After registering you will receive a confirmation email containing information about joining the Webinar. Reserve your Webinar seat now at: https://www4.gotomeeting.com/register/464970191 System Requirements PC-based attendees Required: Windows® 8, 7, Vista, XP or 2003 Server Mac®-based attendees Required: Mac OS® X 10.6 or newer Mobile attendees Required: iPhone®, iPad®, Android™ phone or Android tablet
-
- 2
-
-
- Lathe
- Machine Definition
- (and 1 more)
-
Hello Everyone, Please join us for a free Webinar Friday November 7th at 12:00 noon Pacific time, hosted by Eapprentice. This webinar will introduce you to the latest 5 Axis technology available in Mastercam. The ModuleWorks suite of toolpath utilities gives you unprecedented control over the cut strategy, approaches, retracts, and links within the toolpath itself. We will explore both surface (solid face) and wireframe based toolpaths. Seating is limited, so sign up today! Title: Introduction to Advanced 5 Axis programming in Mastercam, using ModuleWorks Date: Friday, November 7, 2014 Time: 12:00 PM - 1:00 PM PST After registering you will receive a confirmation email containing information about joining the Webinar. System Requirements PC-based attendees Required: Windows® 8, 7, Vista, XP or 2003 Server Mac®-based attendees Required: Mac OS® X 10.6 or newer Mobile attendees Required: iPhone®, iPad®, Android™ phone or Android tablet Reserve your Webinar seat now at: https://www4.gotomeeting.com/register/445567095
-
Hey guys, Want a preview of what’s new in the upcoming Mastercam X7 MU1 release? Then join us on Tuesday, November 26th for a live webinar presentation covering the specifics of the upcoming release. We’re holding it twice, 11AM EST and the again at 3PM EST. The virtual seats are limited so don't delay. Just follow the links below to join us as we cover: What’s New in the Mastercam Simulator Tool Manager Enhancements Mastercam's New Swarf Toolpath Xform Toolpath Improvements View Sheet enhancements, and more! To register for one of the two webinars, please follow these links: 11 AM: https://www1.gotomeeting.com/register/833932089 3 PM : https://www1.gotomeeting.com/register/314861713 We hope to see you there!
