fadal post processor updated issue

[cormigu]

Hello everyone,

Today i updated my fadal post processor (version 9.1 to x6), for some reason the lines in the picture showed, are all on one line on the x6 version, but on the 9.1 version they are on two lines. If i run the machine on the x6 version it will crash. My question is if someone can help turn the one line into two lines like the 9.1 version on my post processor.

 

Any help is appreciated.

[crazy^millman]

Why not use the supplied Fadal post that comes with X6?

[cormigu]

Hi Crazy^Millman

Ive tried to use it but theres alot of lines that need to be chnaged and alot of codes that the machine doesnt recognize, basically it would be alot of editing manually. Thats why i looked for someone who can show me how to modify it.

[crazy^millman]

Well problem is that is not an edit I would recommend if you are doing 3d work. I would would strongly suggest you contact your dealer and let them see why it was done that way and if they help you change it what kind of problems it will create.

[cormigu]

Ok Crazy^Millman, I will.thanks