Output post for P1 -P48

[Born to machine]

Hi All,

would anyone have an x9 post that can output the correct format for P1-p48 work offsets as below?

L1000 L1001
G28 XYZ ; Reference position return G43 X-10.Y-10.Z-100.H10.; Contour
#100=1 ; Initialize added workpiece
coordinate system P No.
G01 X-30.;
G90 ; Absolute value mode Y-30.;
WHILE
[#100LE48]D01 ;
Repeat P No. to 48 X-10.;
G54.1 P#100 ; Set workpiece coordinate
system
Y-10.;
G22 L1001; Call sub-program G00 G40 Z10.;
#100=#100+1 ; P No. +1 G98 G81 X-20.Y-15.Z-
150.R5.F40;
Drilling
END1 ; X-25.Y-20.;
G28 Z ; Return to reference position X-20.Y-25.;
G28 XY ; X-15.Y-20.;
M02 ; G80 ;
G23

regards

[crazy^millman]

On 12/21/2019 at 7:00 PM, Born to machine said:

Hi All,

would anyone have an x9 post that can output the correct format for P1-p48 work offsets as below?

L1000 L1001
G28 XYZ ; Reference position return G43 X-10.Y-10.Z-100.H10.; Contour
#100=1 ; Initialize added workpiece
coordinate system P No.
G01 X-30.;
G90 ; Absolute value mode Y-30.;
WHILE
[#100LE48]D01 ;
Repeat P No. to 48 X-10.;
G54.1 P#100 ; Set workpiece coordinate
system
Y-10.;
G22 L1001; Call sub-program G00 G40 Z10.;
#100=#100+1 ; P No. +1 G98 G81 X-20.Y-15.Z-
150.R5.F40;
Drilling
END1 ; X-25.Y-20.;
G28 Z ; Return to reference position X-20.Y-25.;
G28 XY ; X-15.Y-20.;
M02 ; G80 ;
G23

regards

Your Mastercam dealer.