Post multiple WCS when I just want to use one.

[EliH]

Hey guys, I 've been searching for sometime now but I can't seem to figure this out. I'm working with a hrt210 haas 4axis. When I post the code out it gave me a different wcs at every tool change. For example T1 would be G54 and T2 it would be G55 and so one with every tool. I had to go in and edit everything single one of them to G54. I even checked the offset in toolpath coordinate and assign the same value for every toolpath yet it changed it anyway. other post was mentioning something about locking wcs in the post but I tried to search for it and doesn't see it

[Leon82]

I don't use automatic wcs numbering and set all mine to zero. Then it's all g54.

[EliH]

yup that work.. lol all this time i thought it was the post that was doing it. Thanks you for your help.

[crazy^millman]

Yes that is what Automatic crash will do. One of the first thing I teach any Mastercam programmer is pay attention to the workoffset in your plane. The Automatic has no rhyme or reason to it why I call it Automatic Crash.