Machine group properties?

[Josku]

I just installed mcam 2023 and I was going through some of the defaults settings so that I don't have to change them everytime when I do something with mastercam. But unfortunately I couldn't save machine group properties (hopefully translated that correctly) defaults settings, there is two settings that I would like to change (pictures below) and I can but I can't save the file so that the settings stays where I changed.

In the Machine page, under operation defaults and "edit operation defaults" I can change these settings but it won't let me save it, I think it might even be tied to my current machine group or something so that it wouldn't change it to this current group but I might be wrong. But anyway, in previous mastercam versions I have been able to change it from " operation defaults"

 

 

"program number"

"default value = 0"                                                                   "toolpath configuration"

 

[David Colin]

This is a known issue reported on official forum (D-49570/D-49571)

https://forum.mastercam.com/Topic47973.aspx

https://forum.mastercam.com/Topic48463.aspx

 

 

[IHS Marie-Eve]

It is something that has been solved since but if you want to make it work in 2023 you can use the default library.

[crazy^millman]

30 minutes ago, IHS Marie-Eve said:

It is something that has been solved since but if you want to make it work in 2023 you can use the default library.

I am not seeing and images from those links.