CNC an airfoil shape in MasterCam

[Maximusss]

Dear all, there is a youtube video on machining an airfoil using MasterCam at here, I can see that the edge of the airfoil is still in red color which is indicated by my arrow is not being touched by the drill. Since I will be using a longer piece of cylinder wood to machine this airfoil for my cnc later, how do I program the software to cut the edge too since the cylinder is very long ? I am new to this software :).

I will appreciate any advice I can get.

Thank you 

[Johnward Holmeson]

I'm sure your reseller would be happy to walk you through it. 

[#Rekd™]

Welcome to the forum!

More information is required! What version of Mastercam? What Machine are you programming?

Most important is linking a valid Mastercam file so people can offer the correct solutions without guessing.

 

[Jobnt]

23 hours ago, #Rekd™ said:

Welcome to the forum!

More information is required! What version of Mastercam? What Machine are you programming?

Most important is linking a valid Mastercam file so people can offer the correct solutions without guessing.

 

This may have been too much effort. He made another thread asking the same question.