CNC Mill an Airfoil Shape in MasterCAM

[Maximusss]

airfoil.mcam

 

Dear all, I have this airfoil shape which i created using MasterCam, and I used this milling function called MULTISURFACE, when i select the green highlighted spot above, it will throw me an error. Is there a way to mill the highlighted green part above along side with the entire wing surface? , I used this MULTISURFACE milling, but it did not work for me. I have attached my MasterCAM file for your convenience , hopefully someone might be able to correct the mistake in my CAM files and re-send it to me?  I am very new to this 3d CNC Software, and mostly I done CADs only.

[AHarrison1]

Two threads asking the same thing??

 

[Maximusss]

@AHarrison1, hi, may I ask if you know how to solve this, I spent days on it already? Would you be so kind to help out?

[Jobnt]

The answer is in the previous thread you started of the exact same topic. How about you go there and do what is suggested instead of starting another thread?

[So not a Guru]

Your using the wrong path. Try working with this. I'm sure there are other paths that will work.

airfoil_morph.mcam