Equal Scallop randomly misses lead-ins(outs)

[Maclaw]

Hi All!

Does anyone have this issue in equal scallop that it sometimes and randomly misses lead in and/or lead out passes? To be more specific - not the whole leads, but just portions of it, ex. primary lead or secondary lead... I attach pictures to explain what I mean. Maybe it's me doing something wrong - I don't know... Anyway - this is annoying, because it doesnt feel you have full control over the thing... If anyone has a clue what's wrong - I'll be grateful. I can't attach the MCAM file because of NDA... I tried to explain it on pics only... Sorry and thanks!

 

 

 

 

 

[crazy^millman]

Try turn off minimize trimming.

[Colin Gilchrist]

Try the Fit Transitions checkbox option as well...

[Maclaw]

Crazy^Millman, Colin - big thanks for all your suggestions. Sorry for the long time with the response - I was stuck in urgent and precise prototyping work last week... Since nowadays I'm the only programmer/technology guy in my shop - I was busted 100%

I did try what You told me and unfortunately it did not bring any effect

I turned off "minimize trimming, then "Fit Transitions" and then both of them - nothing changed. I also played with the length/arc radiuses etc. in the leads with no success. I had to give up because the workload is unforgiving.. I will send it to my reseller and let Them deal with it. But first I have to prep the file since the original is under NDA... I hope the fake one will be curtious enough to reproduce the bug

if I get feedback I'll post an update.

Take care!

-Maciek.