change post from APT back to NC Code?

[riverhunter]

Hi,

We have a post for a Matsuura mam-72 that is setup to output APT CL data for CAMplete.  Is there a way to copy any revert in order to output the regular NC code?

Thanks!

quick search in the post brings me here.

	<control>
		<control_label>CTRL_MILL|MATSUURA HPLUS FOR CAMPLETE</control_label>
		<language>en-US</language>
		<misc_integers>
			<misc_1>
				<text>""</text>

[crazy^millman]

Not that I am aware of would need to reach out to the post supplier and see what they say.

[riverhunter]

6 hours ago, crazy^millman said:

Not that I am aware of would need to reach out to the post supplier and see what they say.

Thanks!

[gcode]

You could get an APT to gcode post built.

I've got an old V9 vintage one that I haven't used in 20 years and most post developers offer them.

The problem is, almost every MTB that uses APT have their own personal flavor  of APT.

Building an edit free APT to gcode post would be a lot of work.

[riverhunter]

after looking in to it more,  its just a really basic post doing what it was intended to do (tool info, speed/feed and xyzabc info.  CAMplete is doing exactly what it does by adding all of the correct formatting and engage / retracts.