Okuma MU 6300 Alarm B 2213

[Miki67]

I am wondering if anybody else have this issue.

i have 10 slots.

i made 1 , and then i transferred  the other 9 around the part

first slot is ok, 

when the transform start , that is where I got alarm.

I got email from Okuma saying -- cannot use CALL OO88 when tool center point control is active.

My question is , is there a switch inside post for this, or do i need to send.  this to Postability 

Any help is appreciated

 

[Greg Williams]

Yes correct cant have both CALL OO88 or TCP at the same time, ask your post guy if there is a switch, or upload a Zip2go and maybe somebody here will take a look

[Miki67]

i cannot  share the file

but i will put something together tomorrow.

thank you    

[Greg Williams]

I would use G469

 

G30 P1
(16 ENDMILL R0.5 4FL |TOOL - 16|DIA. OFF. - 16|LEN. - 16|TOOL DIA. - 16.)
G116 T16(16 ENDMILL R0.5 4FL TOOL - 16)
G0 G16 H0 Z999.
M01
G15 H1
G469 P1 Q313 X0. Y0. Z0. I0. J-45. K0.
G467 P1
G0 G90 A-45. C0. S1790 M3
G0 X16. Y-31.074 Z999.
G56 HA Z75.064
G468 P1
M510 (CAS OFF)
G169 HA
G0 X16. Y31.106 Z75.05 A-45. C0.
G131 J2 E=0.025 D=0.015 I0 F20000. (SUPER NURBS SEMI FINISHING)
Y-33.544 Z10.4
Y-40.616 Z3.329
G1 Y-47.687 Z-3.742 F600.
X15.998 Y-47.515 Z-3.913 F700.
X15.979 Y-47.116 Z-4.313
X15.941 Y-46.717 Z-4.712

[Miki67]

Here is the sample file if somebody wants to look at it

note;

HAAS 5 axis works fine, 

it is Okuma that is   no working on transform.

Haas and Okuma post are from Postability.

Thank you.

TEST.ZIP

[Greg Williams]

To transform 5 axis ops you should use coordinate not toolplane

 

[Miki67]

I tried that already, 

same thing

Thank you.

[Miki67]

I forgot to mention that, if you transform only one operation it is ok.

but if I transform more then one operation  it is not good.

sorry about that 

[Greg Williams]

I get the same error, the code should be something like this at the transform. You will need ot contact postability through your dealer

 

X2.33101 Y-8.36638 Z-4.6949
X2.3322 Y-8.36249 Z-4.68972
X2.3325 Y-8.35994 Z-4.68376 A-15.8438
G00 X2.33094 Y-8.34638 Z-4.63566
X2.27008 Y-7.81749 Z-2.75974
Z9.
(2ND SLOT)
X1.75446 Y-7.70568 Z9. A0. C0.
Z-3.36978
Z-5.31978
G01 Z-5.36978 F10.
X1.75506 Y-7.70555 Z-5.37745 F37.
X1.75678 Y-7.70518 Z-5.385
X1.75945 Y-7.7046 Z-5.39237

[Miki67]

Correct

that is how code should look.

I am sending this to my dealer.

Thank you for looking into this for me.

[Greg Williams]

You could just change the Misc reals to 1 here. The code looks okay then

[Miki67]

when i change the Misc reals to 1 this is what i got

do you have same thing   between  operations

if you look at the line  G30 P32  That is my home position on machine

[gcode]

Try changing those 2 misc reals values to 3

 

[Miki67]

 i tried that already

cant have both CALL OO88 or TCP at the same time

Thank you