Vtl wrong axis out put

[mirek1017]

Hello All 

 

I need to find out what happen on my VTL set up .Yesterday when I am start program  part all roll over on my X value ,

This is my set up Vtl  see pic 

 

 

 

Till yesterday everything working fine my post  posting positive  x  value like as should , today I am start mastercam  and all x  axis are negative  ,even when I am open my old  good programs   the  axis are now   wrong  .I am use generic  VTL post  and machine deff  from mastercam   web .

 

This my code ,all X   are negative 

(TOOL - 3 OFFSET - 3)
(RIGHT TURRET - 80 DEG.  INSERT - CNMG-432)
(FACE)
G0 T0303
G18
M8
G97 S50 M03
G0 G54 X-30.31 Z.1
G50 S200
G96 S400
G99 G1 Z0. F.015
X-26.81
X-26.9514 Z.0707
M9
G28 W0. M05
T0300
M01
(TOOL - 3 OFFSET - 3)
(RIGHT TURRET - 80 DEG.  INSERT - CNMG-432)
(OD    CHAMFER)
G0 T0303
G18
M8
G97 S52 M03
G0 G54 X-29.2796 Z.1969
G50 S200
G96 S400
G1 Z.0969 F.015
X-30.416 Z-.4713
X-30.5574 Z-.4006
M9
G28 W0. M05
T0300
M01

 

 

 

 

what  I am doing wrong  ,did I am change something   ???? 

 

 

 

 

 

 

 

 

 

 

 

[Greg Williams]

Uploading a sample file will be best

[mirek1017]

1 hour ago, Greg Williams said:

Uploading a sample file will be best

 

B09470.MCAM-CONTENT

4 minutes ago, mirek1017 said:

 

B09470.MCAM-CONTENT 22 B · 1 download

 

B09470.mcam

[Matthew Hajicek - Singularity]

Using an informative subject title will attract those more likely to be able to help with your situation.

[Greg Williams]

Your Content file is empty.

[mirek1017]

On 2/16/2024 at 10:48 PM, Greg Williams said:

Your Content file is empty.

Can you check this one ?

B09470-2.MCAM-CONTENT