Import

[Balbir]

When I Import any Operation with there Geometry or Without any Geometry from JOB SETUP and IMPORT, My all Tool# changed to #1,2,3,4,5,6,7_ _ Instead of e.g. #31,44,12,33,3,65,98_ _

then I have to go back in operation manager and change all the tool numbers back to what I want or need. Why it is like that?

[Mark H]

In "job setup", unselect the check box "assign tool numbers sequentially" and see if that works.

[Balbir]

THANKS MARK

IT WORKS

DO YOU KNOW HOW TO GET RID OF THAT CHECK MARK?

BECAUSE WHEN EVER I OPEN MY MASTERCAM IT IS THERE DO I HAVE HAVE TO UNSELECT MANUALLY ALL THE TIME?

WHENEVER I IMPORT OPERATION WITH GEOMETRY FROM MC7 TO MC8 . I FOUND THAT SOME TOOL PATH (POINT/CHAIN)ARE MISSING AFTER IMPORT

BALBIR

[TOOLDEV]

Go to Screen-Configure-Operation default-job setup,

de-select the checkmark and save the new settings.

[harmonson]

if you go to screen-> configure, you can fix it in there in your preferences for job set up.

[Balbir]

THANKS

IT WORKS GREAT

ONLY THE LAST PROBLEM I HAVE THAT WHENEVER I IMPORT OPERATION WITH GEOMETRY FROM MC7 TO MC8 . I FOUND THAT SOME TOOL PATH (POINT/CHAIN)ARE MISSING AFTER IMPORT EVEN IF I SAVE ALL MC7 FILES AS MC8 THEN IMPORT THE OPERATION, WHEN I REGENERATE MY TOOL PATH I HAVE THIS MESSAGE:-

bnci_section0:cannot delete nci section!

BALBIR

 

[marco]

Word of advice to BALBIR SAINI

Using ALL CAPITAL LETTERS is the equivalent of yelling on the Internet. You *do* need to duct tape that Caps Lock key down for G-Code, but please untape it for this Forum.

[Balbir]

I am sorry for the CAPITAL LETTERS

[Mark H]

WHAT?

[Balbir]

When I Regen.from Opretion ManagerI Have this message after Import:-

bnci_section0:cannot delete nci section!