marco
-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by marco
-
James , I don't have the option on minimizing the acceleration on the video card. Tried unchecking the openGl that seem to help on the problem that i had on the back plotting... I guess i'll just save my self some time and take you're advise and purchase a new video card...Thanks to all [ 07-02-2002, 11:35 AM: Message edited by: marco ]
-
Cadcam, Pentium 111 Xeon 550MHZ Evans&Sutherlands 16MB video card 512 MB Ram Window NT James Meytte, Tried unchecking the openGL that did not work. Thanks
-
Good Morning to all! Running V9 mill level 3 solid Been having this problem. Every time i start to generate a 3d toolpath its starts to calculate the toolpath then it just freezes, stating at the bottom (generating toolpath)It's a very simple flowline toolpath.
-
Elad That is pretty cool. Also very funny..
-
"quote" How about "Too much time on their hands"? I think gstephens is referring to an engineer.
-
I'm currently operating a VF1 HAAS Machning center. Been operating it for about seven years.
-
xxxx·er [wángkr ] (plural xxxx·ers) noun U.K. Australia, New Zealand (taboo) 1. a taboo term for somebody who xxxxes 2. a taboo term for an unpleasant, self-indulgent, pretentious, or arrogant person [Mid-20th century]
-
Simtech I'll give it a try. E-mail it to [email protected]
-
cadcam The only resellers hurt from your post. Are the ones not giving customers what they are looking for. Instead of taking action on shutting dowm the forum they should take action on improving their service.
-
create next menu letters drafting Make sure your Caps lock is off
-
Trevor, If you don't mind, i would like to take a look at that file. thanks in advance,
-
Word of advice to BALBIR SAINI Using ALL CAPITAL LETTERS is the equivalent of yelling on the Internet. You *do* need to duct tape that Caps Lock key down for G-Code, but please untape it for this Forum.
-
Simtech, I'm still working on that problem.
-
Dave, thanks alot for your help.That seemed to correct the problem.Thanks again.
-
while posting a file. i get a debug message. bnci_wr_prm():can't write nci record.temporary file created. first time i see this message.thanks in advance. [This message has been edited by marco (edited 05-08-2001).]
-
i would rather stay with windows NT, and avoid all the hassle you have to put up with windows 2000. Just my opinon.
-
Make sure that the geometry is all trimmed correctly and that you don't have any double entities.
-
I second that motion.....
-
Billy, Can you be more specific of what you are trying to accomplish.
-
Kenneth Potter I think what Bob is referring to, is not the cam system but his name ha!ha!.....
-
ERROR READING! WHILE SAVING FILE(chains must be closed for extrusion into a solid body.Error(reapplying operation.Regen. not complete. ERROR READING! WHILE OPENING FILE(ERROR IN SAVMOD)(Parasolids®Kernal Interface Error. K1 error code 22-tag is invaled or dead.The strange thing about this ,is that it still saves my file as long as i keep overwriting my error meesg.I've check all my chains and they seem to be all closed.What am i doing wrong..Thanks in advance
-
STOCK TO LEAVE SHOULD WORK..(OKAY)LET'S TRY WORKING AROUND THIS PROBLEM.INSTEAD OF USING THE STOCK TO LEAVE FUNCTION.LETS REDUCE YOUR TOOL .003 OVERALL THE ACTUAL SIZE OF THE TOOL.(.125-.003=.122)AND SET YOUR STOCK TO LEAVE AT ZERO....LET ME KNOW THE OUT COME.....
-
I'VE BEEN USING MC8, EVER SINCE IT CAME OUT.I'VE NEVER HAD ANY PROBLEMS WITH LEAVING MY TRODES UNDER SIZE WITH THE STOCK TO LEAVE FUNCTION. P.S. WHAT KIND OF TOOL ARE YOU USING....
-
Hi Paul!!! Try dncsoftware.com, you can get freedownlaods from them. They seem to work okay....
-
LOOKING AT IT, I SURE DID. I STILL WAS ABLE TO MIRROR THE NUMBERS. JUST HAD TO OVER WRITE THE ALARM MESSAGE QUITE A BIT OF TIMES. THANKS... [This message has been edited by marco (edited 11-03-2000).] [This message has been edited by marco (edited 11-03-2000).]