drill option

[mario]

I would like to have g81 , g73 in operation manager

somebody it is how !!

thanks

 

[Ying Jiang]

Program a drill path and select centre drill cycle(G81) or chip break cycle(G83).

[Allan]

The .txt file with the same name as your post sets up the boxes that are used as well as the name in the operations manager.

Have a look at the example from mpmaster.txt

[simple drill]

1. "G81/G82 - Drill/Counterbore"

2. "Feed rate"

3. "Dwell - G82"

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. ""

8. ""

9. ""

10. ""

11. ""

[peck drill]

1. "G83 - Peck Drill"

2. "Feed rate"

3. "Dwell"

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. "1st peck"

8. ""

9. ""

10. ""

11. ""

[chip break]

1. "G73 - Chip Break"

2. "Feed rate"

3. "Dwell"

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. "1st peck"

8. "Subsequent peck"

9. ""

10. ""

11. ""

[tap]

1. "G84/G74 - Tap"

2. "Feed rate"

3. "0=R.H.,1=L.H."

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. ""

8. ""

9. ""

10. ""

11. ""

[bore1]

1. "G85/G89 - Bore (feed out)"

2. "Feed rate"

3. "Dwell - G89"

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. ""

8. ""

9. ""

10. ""

11. ""

[bore2]

1. "G86 - Bore (stop, rapid out)"

2. "Feed rate"

3. "Dwell"

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. ""

8. ""

9. ""

10. ""

11. ""

[misc1]

1. "Misc #1 Drill"

2. "Feed rate"

3. "Dwell"

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. ""

8. ""

9. ""

10. ""

11. ""

[misc2]

1. "Misc #2 Drill"

2. "Feed rate"

3. "Dwell"

4. "Clearance..."

5. "Retract..."

6. "Depth..."

7. ""

8. ""

9. ""

10. ""

11. ""

Note that line 1. "allways has the name of the cycle"

[Kenneth Potter]

Is the text file for said post the place were you can set up your custom drill cycles ? If not were ?

 

Kenneth Potter

[Luther_Heggs]

Yes - filling in any text other than the blank string "" will enable the field in the custom page.

[Kenneth Potter]

So if i have a two thru holes to drill that are at the same X Y location with different Z depths . That would mean i would have to add an extra rapid & feed plunge action. This is were i would set it up?

[mario]

merci beaucoup

thank's you