NEED HELP FOR WIRE POST

[LEV DIES]

[email protected] I HAVE MASTERCAM WIRE VER 8.1.1

& NEW MACHINE AGIE EXCELLENT

THE LAST POST FOR AGIE VER 8.1 DOES NOT GOOD SO MUCH FOR THIS NEW AGIE MACHINE . CAN ANY ONE HELP WIRE CAN I GET SOMTHING TO HELP ME

[CAM Disciple]

Please read FAQ.

 

What kind of help do you need?

Do you need help in modifying your post?

Please be specific.

[Toolfab]

[LEV DIES]

I WANT TO MAKE CHANGE IN THE POST OR TO ADD SUB PROGRAM AT THE END OF THE POST THAT WILL CONVERT ME THE GEO TO ISO THAT FIX TO AGIE EXCELLENT.

I DONT NO IF I EXPLANE MY SELF VERY WELL BUT THANK YOU ALL ANY WHERE. OFER B.

[TREV]

lev dies,

i can not help with your wire post issues,sorry.

but perhaps you could turn the CAPS lock button off.maybe show some of your code and what you would like it to look like.im sure someone could get you going.sit tight and welcome to the forum.

trevor

[chris m]

Lev

 

I did a search for 'Agie post' here on the forum and didn't find a lot of encouraging things but there seem to be a couple of forum members who have had post problems with these machines. If you search those terms you can find these members and perhaps email them to discuss your specific issues and see if they can help you out.

 

Sorry, I know absolutely nothing about wire machines or wire posts or I'd try to steer you a little better

 

C

[Jody]

We have an Agie Classic 2S the guys that run it use the software that Agie recommends Peps . it is a pain to draw and modify geometry but it works great with the Agie. We use Mastercam Draft to draw and manipulate the geometry much easier and faster.

 

If someone is using Mastercam to run an Agie i would like to take to them. We do have ver.9 wire but don't use it yet.

 

Jody

[Keith Graydon]

Where's Whinnie when we need him?

[TREV]

hijack thread,

quote:

__________________________________________________Where's Whinnie when we need him

__________________________________________________

he's on the bavarian beer tour for a week.im sure we'll here from him when vacation over

trevor

[Lucky]

Sounds to me like you are using mpwagie.pst which creates .geo files. For the Agie Excellence machine using the AgieVision control, you should be using the mpwagevo.pst. This will create the .iso files you need. It is on the installation CD.

[4xxx4]

Find this line " sextnc .GEO " in your post and edit it like this;

sextnc ISO

 

You will post .ISO out as a standard file extension. Other results may not be as planned though.