MR0105 bug? Surface flowline

[Don S at Barefoot CNC South]

Hi,

Since updating to MR0105 my flowline tool paths now end approx. .100 away from the end of the surface in the cut direction end od path. This was not happening before that and there is no way to set a containment boundry. My only option is to extend the surface length. Is this a bug or something there now I don't know about.

Thanks

[crazy^millman]

Don I would send the fiel to QC and let them take a look and see if they find soemthing you are not.

 

Or we can take a look. I have been doing some crazy stuff just fine with Flowline, Project Blend, Contour and had no problems.

 

HTH

[Don S at Barefoot CNC South]

Ron,

I sent a file to QC and they are checking it out.

Thanks

[Don S at Barefoot CNC South]

Still nothing back on this issue?

[Mike Whitten CAD/CAM Contractors]

Don,

 

They are very busy with X now at CNC. Maybe you should post the file so we can look at it.

 

Thanks,

Mike

[Don S at Barefoot CNC South]

I have sent CNC another email and file about this.

[cadcam]

I cut a few parts last night using Flowline nad know troubles.

Want to share your file?

[Don S at Barefoot CNC South]

Jay,

Try doing it on a concave surface with a 1" ball nose endmill.