WCS problem w/solid drill

[kinglouie V]

cant seem to reorient for my G55 w/o

toasting the damn thing. any ideas

greatly appreaciated. located in ftp

at mc9 files (304-0452-001_op1).

[kinglouie V]

just thought I'd share what my reseller had

to say since you all are so quite.....

 

 

quote:

---

When using WCS, at the "T/C Plane" parameters page, Tplane and Cplane should

be set to Top, and have no offsets. "Working Coordinate" should be set to

the named WCS for that operation.

 

But, in your Solid Drill example, this is not working correctly. I am going

to work with it a little more, but will probably have to send it in to

Mastercam for help. It looks like a bug where Solid Drill does not support a

WCS.

 

I will keep you posted as to what I find out.

---

[Mike Mattera - TFM]

It's a bug.

 

Mike Mattera

[kinglouie V]

Is this fixed in X ????

[crazy^millman]

Well King I would direct that question to ProDrill not Mastercam since they are the people who made and sell PRoDrill if I am not mistaken.

 

HTH

[kinglouie V]

naw, naw not prodrill, solid drill, different animal all together, no?

[PE @ IHS]

Yes, they are different. Prodrill is a more advanced add-on.

 

Take a look at Prodrill, it is WELL worth the money! Send your file to Anbu and see if he can perform the necessary magic.

[crazy^millman]

Yeah helps to get the threads straight sorry about that.

[kinglouie V]

Ok, but is solid drill fiXed in X ????

 

also wondering about MCDirect.