Create/line/paralell

[Müřlıń®]

Anyone else have to hit enter twice?

[Thad]

Do you mean once after entering the distance, and then once to accept? Yes. I think it's all part of the new "sketcher."

 

Thad

[Müřlıń®]

All of the other functions you only need to hit enter once.

 

Paralell line for some reason I have to hit enter twice and ok once to clear out.

 

I don't remember haveing to do that when I was at the house on my other PC

[Thad]

The first Enter gets it on the screen. It can still be edited. The second accepts it.

 

You could type the number, hit Enter and then click OK.

 

Thad

[Müřlıń®]

I can place the offset with left mouse, edit by typing the number, hit enter, hit enter.....

 

Sounds dangerously close to, "OK/are you sure" But out of all the functions, that's the only one I have found so far that you have to accept twice....

It would be nice if it could be reworked to use only one enter command, you have undo and do not need to be sure.

[Pete Rimkus from CNC Software Inc.]

But you don't really need the 2nd 'enter'! Just go to another function.

 

I like being able to pick the line, pick the point (or enter the distance) and then just go elsewhere.

[Müřlıń®]

quote:

---

But you don't really need the 2nd 'enter'!

---

Only if you aren't making a bunch of //'s

 

I know there are lots of diffrent ways to build the same thing, I was just acustom to using // a certain way.

 

I didn't realalize however that you could skip ok and enter by just moving on. Neat trick

 

 

Murlin teh lots to learn...