Few Problems need help

[shienh]

I started using X. Here are few problems I faced.

 

1. When copying a tool path, speeds and feeds change to default from library and cannot be edited.

2. When editing a Tool inside toolpath parameters it doesn't update the values on corresponding fields.

 

Are there any settings to fix it or is it a bug?

[kinglouie V]

are you right clicking inside the particular operation and selecting the speed and feed calculator? are you taking speeds and feeds from tool or material?? to specify go to op mgr. click on tools tab and specify.

[shienh]

I'm using speeds and feeds from tool. While copying a tool path speed and feed shouldn't change but they do.

[gcode]

Do you have "from tool" checked in Properties/Tool Settings in the Operations Manager??

[shienh]

Yes I do

[shienh]

I changed it to "FROM DEFAULTS". That fixes it.

[BEYoungJr]

Glad I found this post. I have a few 2D contours and tweaked the speads and feeds for each. I simply try to copy one or all operations and the speeds and feeds are lost. I tried selecting "From Tool, From Material, and From Defaults". Nothing allows me to bring my previous values forward. Version 9 ALWAYS allowed this.