Moving X to a new PC

[lynnz]

We just got a new PC to put 1 one our seats of X on. Pretty much the tool library and post processor were doing what we wanted on the old machine.

My question is what files within the program do I need to backup? Just wanting to make sure I get everything I need backed up. I'm not sure about everything with machine def files and control def files and such.

 

Thanks,

lynnz

[John13]

check this link

 

HTH

 

also if you search back up files, there might be some other good links to look at

[Kannon]

this might help

 

Pretty quick this mornin John!

[John13]

copy cat

[Kannon]

The search tool is a wonderful option here isnt it..

[Thad]

You could burn the entire install directory to a DVD (or multiple CDs), just in case you forget something. Or you could just grab it off the other seat of MC.

 

Thad

[lynnz]

Thanks to all for info. I did a search briefly, but didn't search for correct phrases.

 

Thad,

that sounds like a good idea. I'll probably do that.

 

lynnz