xform problem

[AllenT]

Hello everyone

I am trying to Xform translate and Xform rotate a large file to setup my WCS, the result I got after always missing most of the geometries, the dimension notes are there, but some of the geometries just simply disappear, is there something with my CAD configuration?

thanks in advance for your helps

Allen

[Guest]

Sounds like you are trying to transform a solid and do not have solids.

 

Just create a new WCS where ever you need it. Then you do not have to move anything

[Hardmill]

The WCS is used to set zero. No need to move the

part to it.

You set your WCS to a feature in your drawing.

 

BTW what is your config, and what ver ya using??

 

 

PEACE

[AllenT]

thanks alot just new to V10, never used the proper way either , use to do Xform translate, rotate and switch between wiew in V 9.1

thanks

[Mike Gates from Barefoot CNC]

If you are trying to bring in a solid and do not have the solids upgrade there is a solution if you can save the original as a parasolid. Once you get your parasolid file you can go to file/open/parasolids/open options box next to parasolids/check import as trimmed surfaces/ok.

Now you will be able to manipulate the surfaces as needed.