x+ where o where did you go?

[moldy]

Somehow i've messed it up again. I cannot get x+ to come up in the toolbar states. I've reloaded it but its not there. I think I resest something in vb script? If I run alt.C it is there but runs as a error ( Program entry point not found)

Any Ideas..... Thanks

[Günther Massimo - GMCCS]

You can not launch X+ with Alt+C.

X+ starts automatically with mastercam.

 

Try to install X+ again. Select the correct mcamx folder during the install process. It has to be the mcamx main folder.

[Rakesh]

Hi Gunther

how I can change font and background colour in x+

thanks in advance

[Jeremy Haage from MCAM NorthWest]

Just FYI, the installation I downloaded for X+ MR1 defaulted to an incorrect installation path. It was I believe "c:macmx" instead of "c:mcamx".

[Todd Tracey from Fastech]

That was the old one, re-direct it during the install

[Günther Massimo - GMCCS]

Rakesh, after the installation you should have a new toolbar called X+. Activate it, then you can press the button with the "A" icon.

Mastercam should be closed during installation.

[Rakesh]

hi Gunther

I install x+, but during installation it give,YOUR COMPUTER IS HALTED AND NEEDS TO DO SOMETHING ABOUT THIS SCRIPT

C:mcamxchooksX+CreateToolBarX+.vbe

When I install, it give new view on the operation manager but i could not see the toolbar

please need your help

thanks in advance

[moldy]

Thanks for your ideas.

My problem was I created in Settings Customize a file called (My Favorite MTB). Instead of the default file Mastercam MTB.

I then set the config. file to load My Favorites MTB.

It seems X+ loads into Mastercam MTB. When I changed back to Mastercam MTB, all is fine.

 

Don't ask why I did this? Being self taught I get lost down every path possible. When I need to know about something I find I've been there before and I now know how it correctly works!

Thanks

[Rakesh]

hi moldy

Are you able to bring x+ toolbar.

I am trying to get this tool bar but no success.

Any idea

thanks

[smokey_44]

Hey Rakesh

 

 

Can you not just right click on the ribon bar and click on X+ toolbar to show up ?

 

 

Dave

[moldy]

Yes I now have a toolbar. Before it was not there. Check and make sure you have Mastercam MTB. loaded in. Go to Settings-Customize Then click on folder you should see Mastercam MTB. if this is selected then x+ should appear towards the bottom above xform. Hopes this helps......Later

 

Moldy

[Rakesh]

finally is working now

thanks for your help