drilling using 4 axis rotary

[mike561h]

hello friends. I was trying to drill using rotary.

15 degrees 24 times on a can. I had parames set at z axis rotation and 15 degrees max and min created the holes with points and a line. I selected hole centers and used line. got the first drill cycle to work but no rotation. any tips

thanks

[c-hook]

Some thing like that I would just put into a sub-routine, its qicker and less hassle than trying to program it in Mastercam IMO. HerE is an example of what I am talking about.

 

 

G0G90G54X0Y0

B0

S1000M3

G43H1Z1.

/M8

G98G83Z-1.R.1Q.05F2.

M98P0001L23

G80M9

M5

G0G91G28Z0

M30

 

 

0001(SUB)

G91

B15.

M99

[Fig sign]

Use rotary substitution

[Bruce Gibson]

i grabbed a file off the ftp and added a drilling example. in the mc9 dir: rotary-axis-test-round jay_bruce.mc9

[MIKE_B]

Hijak

 

Why is it that when I program using rotary it backplots in the back view? My program is WCS top, T/Cplane top.

[Bruce Gibson]

upload/send the file