Wire path turning full arc

[piranha]

Hey fellas, I have a toolpath in X that reaches an arc between 2 line and turns a full arc before continuing. I can't find any settings to change this. I have looked through the machine def and control def but nothing seems to fix it. Any ideas?

[Doug Nemeth CNC Software Sales]

piranha-

 

Is this happening at the machine or in Mastercam? If it's in Mastercam, do you think you can send me the file? [email protected].

 

Thanks!

 

Doug

[Guest]

piranha,don't know if this helps but in my

contol def. under arcs my settings say:

checked on support arcs in xy plane

xy plane delta start to center

arc breaks is unchecked under allow 360 deg arcs

arc break options don't break arcs

[piranha]

Doug,

 

Yes it turns a full arc in Mastercam and at the machine.I even broke the arcs at the midpoints and ran it again. Same problem.I'm going to send the files to your E-mail. Thanks

[Guest]

piranha, also under arc error checks length of arcs is checked

[piranha]

Del,

 

My settings in the control def. are set the same as yours. Thanks for the reply

 

 

Dave

[piranha]

Hey Guys,

I hate it when this happens but, its now working fine and I didn't change anything. I do have more questions for later. We'll chat soon

 

 

Dave

[Doug Nemeth CNC Software Sales]

Gremlins....

[Bruce Gibson]

how about screen next menu, combine views? v9 i know...

[Storkman]

He tried all that Bruce. Thanks for the idea though.

[Hardmill]

quote:

---

quote:

---

He tried all that Bruce. Thanks for the idea though.

---

---

:SMACK:

 

No ones talkin to you blockhead

 

 

PEACE