MastercamX post.

[Guest]

Hi,

 

I just receive MastercamX and i need a post for two lathe c.n.c machine.

 

Our lathe is:

 

Mazak Super Quick Turn 250M with a mazatrol 640T fusion control panel. We have the live tooling option.

 

Nakamura SC-150 with a Fanuc Series 18i-T control panel. We have the sub spindle and live tooling option.

 

Thanks for your time.

[Storkman]

[5 AX]

We all need posts.

[Don S at Barefoot CNC South]

Try this: Your posts

[Guest]

If you have posts for version 9, update them.

 

If not, open the wallet and call the reseller or dig in and start tweaking.

 

Asking for a post around these parts is NOT a great move.

 

[ 05-15-2006, 02:27 PM: Message edited by: John Paris @ Kevlin Microwave ]

[Kelly Burns]

Wow, someone actually asked for a post on their first post. I didnt think anybody would actually do it, but it happened.

[chris m]

Your profile looks like you are legit, so I will encourage you to read the forum FAQs as Don has linked above and call your Mastercam reseller for assistance updating your existing posts or procuring new ones.

 

C

[Hardmill]

2 posts coming up

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

 

 

 

PEACE

[Mike Mattera - TFM]

Please click the link and read rule number 1. Then read all the other rules.

Welcome to the forum. It's a great place. we can help. But we have rules.

 

http://www.emastercam.com/ubb/ultimatebb.p...ic;f=1;t=008993

 

Mike Mattera