duplicate arc entities,

[Dave Walden]

Hi Guys,

First day on here and I've already learned a lot so thank you.

I am running MR2 mill level 2, I receive files from autodesk inventer in a solid and I am having problems toolpathing broken arcs. I am deleting the surfaces, projecting it two a 2D drawing, joining all arcs, and deleting duplicate entities, even with the plane mask on it wont toolpath the full circle. Is there a c-hook or nethook for deleting partial arcs.

[Hardmill]

Check your chooks folder for FindOverlap.dll

 

 

PEACE

[Hardmill]

WELCOME to the forum

 

 

PEACE

[Charlie Pierson]

Mabye if you move the circle to a different level, shut off the original level w/ the offending arcs.

Or shut the level w/ the circle you need off, then delete the offending arcs, turn the circle level back on and try it???

 

 

btw, Welcome to the forum

[Kannon]

I dont know bout X but is there a "wait" function

that allows you to continue the chain to complete the chain like in 9?

 

Welcome to the forum!

[chowquoe^]

Yes there is a "wait" check box, i use this alot in combination with partial chain.

 

Welcome to the forum

[Dave Walden]

You guys are awesome the findovrlp chook did it, thanks for all your help

[Hardmill]

 

 

PEACE

[Kannon]

Hardmill!