90 deg. Sample code needed...

[Kelly Burns]

I do NOT want a post.

 

 

I would like sample code to send to my reseller so that he can create a post for our 90deg. head.

Its hard to tell him what I want when I dont know what I need.

 

Thank you to all.

[Hardmill]

quote:

---

I do NOT want a post.

---

Yeah you do Go ahead and ask Its OK

 

Do a search for right angle heads, might be quicker to

email someone whos using one.

 

 

PEACE

[Kelly Burns]

Well, yeah, sure I do. Dont want to get abused to bad though. I already sent mail to Phil the martian man.

 

Thanks

[Bruce Caulley]

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=020040

 

I haven't properly tested this yet, but could give you some code. Make sure that the post gets the info it needs from the aggregate and tool parameters page rather than from Mi's.

 

Bruce

[Kelly Burns]

Bruce:

 

Whata you got? The link only shows that you guys had success in building a cool post, but no code.

Show me the code! Show me the code.

[Bruce Caulley]

You have mail!

[lowboy]

Any way I could get a look see?

That's something we want to try.

[Jack Neelands™]

me too ...me tooo?

not post ...just code?.

i can write me own post ...just need to see what axis your are stipulating and how orientation is brought about if different from 5 axis

[Bruce Caulley]

code:

---

 %

O0000 (ANGLE SAMPLE)

(MASTERCAM - V10.)

(MCX FILE - G:CADANGLED HEAD SAMPLESAMPLE.MCX)

(MATERIAL - ALUMINUM MM - 2024)

(PROGRAM - ANGLE SAMPLE.NC)

(DATE - JUN-29-06)

(TIME - 07:55)

(POST LIC - FERRA ENGINEERING)

(T12 | 0. / 90. - STATION NO - | H0 | D0 | D25.0000mm | | FACING.....)

G00 G18 G21 G40 G49 G80 G90

(POSTED WITH 30. TOTAL COMP LENGTH)

(COMP LENGTH FROM TOOL DEFINITION: OVERALL + HOLDER)

(POSTED WITH 20. OVERALL TOOL LENGTH)

(POSTED WITH 10. OVERALL HOLDER LENGTH)

(POSTED WITH 0. BLOCK ANCHOR POINT Z OFFSET)

(VALUES USED FOR 5-AXIS AGGREGATE LENGTH COMP)

(AGGREGATE MOUNTED 90. DEG CCW IN FRONT FROM VERT POS)

(AGGREGATE MOUNTED 0. DEG CCW IN TOP FROM 3 O'CLOCK)

S0 M03

G00 G90 A0. B0.

X-580. Y152.5 S0 M05

G43.1 H0 Z100.

Z-249.998

X-540.

G01 X-530. F0.

Y-140.

G19 G02 Z-232.141 I0. J0. K8.928

G01 Y140.

G03 Z-214.284 I0. J0. K8.928

G01 Y-140.

G02 Z-196.427 I0. J0. K8.928

G01 Y140.

G03 Z-178.571 I0. J0. K8.928

G01 Y-140.

G02 Z-160.714 I0. J0. K8.929

G01 Y140.

G03 Z-142.857 I0. J0. K8.929

G01 Y-140.

G02 Z-125. I0. J0. K8.929

G01 Y140.

G03 Z-107.143 I0. J0. K8.928

G01 Y-140.

G02 Z-89.286 I0. J0. K8.928

G01 Y140.

G03 Z-71.429 I0. J0. K8.928

G01 Y-140.

G02 Z-53.573 I0. J0. K8.928

G01 Y140.

G03 Z-35.716 I0. J0. K8.929

G01 Y-140.

G02 Z-17.859 I0. J0. K8.929

G01 Y140.

G03 Z-.002 I0. J0. K8.929

G01 Y-152.5

X-540.

G00 X-580.

Z100.

G53

G91 G28 Z0.

G49

G28 Y0. A0. B0.

G90

M01

M99

%

---

[Jack Neelands™]

sweet...for the maho's?

here is an OT question if i might add...Craig still there?

[Kelly Burns]

Thanks for sharing Bruce.