setu sheet error

[Rick46]

here is what I get when I attempt to create a setup sheet.. thanks

 

[Storkman]

I can't read that bud. What does it say?

[Kannon]

if you click on the image a couple times it enlarges so you can read it.

[Steve Zirtzman]

The Mill.set setup sheet does not have a control definition?

[Rick46]

ok how do I fix this /??? lol

[Storkman]

On the files page in the cd is a check box for write nc operation information

[Steve Zirtzman]

Terry,

My box is not checked and Mill.set works.

[Storkman]

Huh, mine is checked and that seems to be what it is asking for. But I am using html.set not mill.set

 

[ 07-03-2006, 02:28 PM: Message edited by: Terry Houseknecht from Stork Inc. ]

[Rick46]

oh cheked my box and all works now

 

thanks

[Steve Zirtzman]

sr_7626,

Has it been working fine and now just started giving you this error?

[Rick46]

never used it before.. I recieved the error before but it still worked just trying to resolve the error issue was all...

[Na Dtuath]

I am also noticing some setup sheet problems. The setup sheet file defaults to the mcx file name and not the nc file name for each tool group (I usually separate programs by tool group with unique nc file name for all opps in the group). It would be nice to get different setup sheets to come up when I have more than one tool group selected. When I do that I get one setup sheet with the tools from the other groups added to the end. Printing them one at a time is ok. I usually dont save them so I add a few notes, print them and close the editor and answer no...I dont want to save...but it saves it anyway. Is there a way to stop this so I don't have to keep going to my nc files folder and deleting them? Is there a way to get the setup sheet to default to the nc file name?

[brilu397]

My setup sheets name comes from the nc name of the op above the red arrow ( i'm not at work to see if I have any specific settings to make it do that.) Only the tools selected will be output in the set up sheet. So, by placing the Red Arrow inside the group you want and only selecting those ops you should get seperate setup sheets, but they will have to be done 1 at time.

AS for the save by default, I have no idea.

Brian