Back ground and toolpath colors

[Rick Henrickson 65]

ok switched jobs, dont no how to get background multi shade and toolpath manager?

was it a chook?

[John13]

settings...configuration...colors will let you change the background color

[Rick Henrickson 65]

what about the background color on the tool paths and solid manager I thought it was a chook of some sort

[Hardmill]

Check here.

 

 

PEACE

[Rick Henrickson 65]

hardmill use always have the answers

[Rick Henrickson 65]

ok how do I get it to work, I thought it was just a toolbar?

[Hardmill]

Add it to your RMB.

 

 

PEACE

[Rick Henrickson 65]

RMB?

how?

[Hardmill]

I'll get back to you in a bit, unless John jumps in ta

save you, he showed me i believe

 

 

PEACE

[Rick Henrickson 65]

also how do I get my config and tool bar to stay?

[88Matt]

save your config as a seperate file and then place the name of the file in your MCX shortcut (same line as the switches). this will bring up your config each time u start mc from your shortcut. works great when u have multiple users on one pc and they ALL want something different.

 

Matt

[Rick Henrickson 65]

ok I git the x+ working, now just need to get the mtb and config to hold

[Colin Gilchrist]

Hi Rick,

 

To get your toolbars to stay do the following:

 

Use the Settings - Customize dialog box to customize your toolbars and your Right mouse button. Once you have things setup the way you like them, Press the Toolbar States button. You can also get to Toolbar States through the Settings menu.

 

In toolbar states dialog box type in a new name (like "Rick"). Then press the save button. There should be a new toolbar state named "Rick" in the toolbar states list box. Click on the "Rick" toolbar state to highlight it and then press the "Default" check box. The Rick Toolbar state will now be loaded when you start mastercam.

 

To save your configuration settings:

 

Go to Settings - Configuration - Start/Exit page. On the Start/Exit page you can choose which configuration file you would like Mastercam to load on startup.

 

Hope that helps,

 

Colin

[Rick Henrickson 65]

thanks again Colin!

[Colin Gilchrist]

You are quite welcome Rick.