Users, what do you think ?

[Ken Erman from CNC Software Inc.]

Changing the activation weight by editing the config is working in my daily version of X2, i did not try X MR2.

 

This option was added way back as a means to not have the speed of transform slow down when large numbers of entities were being manipulated or when solids were involved.

 

We will not be adding an interface for this in X2 but we can consider it for a future version. In the mean time if you always want it on you will be able to set the Activation weight to 1.

[Matt Berube at Ferron Mold]

Ken,

 

Thanks for weighing in on this.

 

You've got mail.

 

I can't get the Activation weight change to work.

 

I wouldn't care if it ever made it into the interface. If it was working the way you describe I'd be thrilled.

[Ken Erman from CNC Software Inc.]

Matt,

 

The box surrounding the "Group" doesn't appear until some sort of action takes place. If you just hit Enter when the focus is in the # field the box should appear. I am putting together a proposal to add a switch in Xform to turn the bounding box on/off for a "future" release. No promise or dates are implied by this.

[Steve Zirtzman]

Ken,

Which Activation Weight in Config needs to be set to 1?

[Matt Berube at Ferron Mold]

Ken,

 

Thanks for your help with this.

 

Steve,

I am 99% sure he's talking about parameter 10201. That would give a boundary on any combination of entities (even a single line) but only after changing "something" in the dialog box.

[Steve Zirtzman]

Thanks Matt,

I will give that a try.

 

It was really a coincidence that you started this thread the same day one of our programmers was asking me about the bounding box. He was translating a solid and the bounding box was saved a geometery. Do you know how this could happen?

[Matt Berube at Ferron Mold]

That one is new to me...

 

If he can duplicate it send it to QC.

[Mark V.]

Steve,I get that if i dont have the main level on when translating and rotating.It will create geometry.

[Steve Zirtzman]

Mark V.

Ah Ha, I will look into that.

Thanks

[[email protected]]

i was thinking if you guys have got an answer ]

 

because there is also similer problem with

 

autocad and they are trying to contact there

 

resalers

[Matt Berube at Ferron Mold]

Salem,

 

Which issue are you asking about ? We got a little off topic at the end...

[[email protected]]

the issue is the bounding box while moving

 

some one in other furom says that when he use screen recoder with autocad